Jump to content
SAU Community

Recommended Posts

R33 GTS/S

Non Turbo RB25

Manual

Couldn't get a colour code i think its because its a non turbo... same as the guy a couple of posts above the vin no. won't recognise had to use model number.

Thankyou, You've put my mind at rest about it being a auto converted to manual, glad it's factory manual at least haha.

March 1997

R33 GTST Type M

Manual

Color field is empty as i believe there is something wrong with your vin.

Cheers lanky, finally got their in the end :D

wierd tho, the guy i bought it off was 100% sure it was a 1996.. its even rego'd as a 1996.

ahwell..

(also the car is white, but i have a suspicion its been resprayed from black)

thanks again lanky + the othes who helped

i may have missed it, but is this FAST check limited to skylines only or can s13's be fasted?

Yea I'd say so ....mine is givn me lists of parts 4 s13z

whats ya vin someone will fast it

not quite a VIN request guys, but i'm in need of FAST so thought i'd post it here.

i have what i believe to be an r32 gts-t wastegate actuator.

it has "ASN 79 - 24 *something* 525" on it.

can anyone confirm if this is the correct part number? or what the number for an r32 gts-t actuator is?

thanks a lot :wub:

Ric

not quite a VIN request guys, but i'm in need of FAST so thought i'd post it here.

i have what i believe to be an r32 gts-t wastegate actuator.

it has "ASN 79 - 24 *something* 525" on it.

can anyone confirm if this is the correct part number? or what the number for an r32 gts-t actuator is?

thanks a lot :D

Ric

nissan part no.z are usually something like 14483-04U05, I think the 32s had at least 3 different actuators (can't read Jap,sorry)

if you are after the program 4 yourself I'd suggest you google :- 70F6451B09CD69E8758A32264323C8E85CD74910

hope this helps some

Edited by BundyBear

Sigh...... here's a wobbly for ya's to try ..... i just installed FAST , and it correctly pulls up all the info on the VIN's i randomly selected from this thread to try, however, ofcourse, it says mine cannot be found.

ECR33 012643

Its a S1 r33 4dr auto.

Oh and just for a total smack in the face .......... 012642 and 012644 WORK !!!!!!!!!!!!! AARRRGgggggg

Gary

gallery_20639_3608_39565.jpg

Edited by Fastrotor

I only get yours to work when entering the model number then vin no. but its a general info like ones mentioned above no colour code info.

Just to double check it gave me right info October 1993 built?

I always though it was 9/93 so Oct sounds correct. How do you mean entering model THEN Vin no ? Im new to Fast sorry.

I have to enter ECR33 , then tab to next box and enter the number XXXXXX to get it to work, do you mean this or something else ?

Gary

This is the only date i have on the car, the importers plate.

post-a263883-R33-import-plate.JPG

post-20639-1262609393_thumb.jpg

Edited by Fastrotor
6U900BCNR33003083

cheers, thanks

:)

R33 02/95

Color # kn6 (Plumb)

Interior :k = Grey

Model :2k

GTR

RB26DETT

5sp Manual

HikeAss

4WD

Model No.GGJPRQFR33ZDA-J---

EDIT:: FYI the 6U900 just means its an import. its not part of the VIN as far as Nissan is concerned, just the RTA, cops n the like

:: ghostflameR33

I could be wrong here ubt I don't thing FAST includes any Engine No data as it's primarily 4 Spare parts

google is GOD

Cheers all

Edited by BundyBear
R33 02/95

Color # kn6 (Plumb)

Interior :k = Grey

Model :2k

GTR

RB26DETT

5sp Manual

HikeAss

4WD

Model No.GGJPRQFR33ZDA-J---

EDIT:: FYI the 6U900 just means its an import. its not part of the VIN as far as Nissan is concerned, just the RTA, cops n the like

Cheers all

thanks mate, but are you sure on the colour? Mine is Midnight Purple....

????

thanks mate, but are you sure on the colour? Mine is Midnight Purple....

????

yea preety sure, mine is the same color KH2 ( looks gunmetal grey with red and blue 'perl'), the color code is actually on the compliance plate(firewall one, not import plate)), just above the engine type, RB26DETT . See port #1713, his paint code is KH2. This will confirm FAST info, and if the cars has changed color. KH2 is also refered to as gunmetal grey sometimes

PS midnight purple is a rare colour, price me thinks, codes are

LP2 (R33)Midnight Purple (no Chromalusion, has 2 pearl tinters Violet & Red)

LV4 (R34)Midnight Purple II (Chromalusion Tinter KK760 Absolute Purplene & Vilot Pearl)

LXO (R34)Midnight Purple III (Chromalusion Tinter KK700 True Blazberry Prizm & 2 pearls red & Violet)

see Here for ALL the Paint codes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...