Jump to content
SAU Community

Recommended Posts

Hey everyone just after a bit of advice.

My brother is just about to buy a r33 4 door. He asked me is it worth paying the extra couple of grand to get series 2? I wouldnt really know because i drive a 32, so If some of you 33 drivers out there could enlighten me on some of the differences between S1 and 2 it would b much appreciated.

Cheers. Ben

Link to comment
https://www.sau.com.au/forums/topic/128666-r33-s1-vs-s2/
Share on other sites

Internally......different coils to a series one. turbo has a plastc compressor wheel (series one has a metal one), both have ceramic exhaust wheel. Engine is the same and so is the gearbox etc.

Or if you mean internally as in Dash etc, the S2 has a nicer looking airbag steering wheel, dash is the same but surround is slightly different (the platic is more textured and the coin holder on the right of the steering wheel is gone).

I am sure there is some more but cant think of it all right now. I think that the S2 is worth the extra $$ for the updated front end.

Link to comment
https://www.sau.com.au/forums/topic/128666-r33-s1-vs-s2/#findComment-2379252
Share on other sites

i imported a stock clean R33 series 1 5spd turbo sedan for $11500 inc on road costs.

I would expect you would pay upwards of $14K on the road for a clean series 2 5spd turbo sedan.

Can you show me a 5 speed S2 GTST thats Turbo and $14k or $15k Id will buy it today, thats about the price Im paying for my R33 GTST S2 Auto.

Link to comment
https://www.sau.com.au/forums/topic/128666-r33-s1-vs-s2/#findComment-2380568
Share on other sites

Can you show me a 5 speed S2 GTST thats Turbo and $14k or $15k Id will buy it today, thats about the price Im paying for my R33 GTST S2 Auto.

Checking the jap auction sites, the price they go for would making $15K a reasonable figure for one. If you are buying locally from a yard or privately, you will pay more.

I bought mine through autoworx, cost me 260,000yen direct from the auctions. I didnt enquire about Series 2 turbo manual sedans as I didnt want one, but surely they would only be $3-4K more than a series 1.

Link to comment
https://www.sau.com.au/forums/topic/128666-r33-s1-vs-s2/#findComment-2385589
Share on other sites

  • 4 weeks later...
Hey everyone just after a bit of advice.

My brother is just about to buy a r33 4 door. He asked me is it worth paying the extra couple of grand to get series 2? I wouldnt really know because i drive a 32, so If some of you 33 drivers out there could enlighten me on some of the differences between S1 and 2 it would b much appreciated.

Cheers. Ben

Paul from Autoworx wrote a R33 Skyline buyers guide which covers how to tell the difference between a Series 1 and Series II. Its free - I think you just have to sign up to the email newsletter to get the info. Heres the link http://www.autoworx.com.au/mail.htm

Link to comment
https://www.sau.com.au/forums/topic/128666-r33-s1-vs-s2/#findComment-2453165
Share on other sites

Series one is better :P

Series II has different lights and a bit of a squarer front (to tell yo uthe truth its down to personal preference but i've never been a fan of the 2)

The series II has the airbags from memory.

Tell him to buy mine Ben :blink: its not a four door but what the heck - throw on some roof racks n store the kids up there :)

Link to comment
https://www.sau.com.au/forums/topic/128666-r33-s1-vs-s2/#findComment-2453205
Share on other sites

HAHA thx Lauren

he bought a car. Ended up buying off someone from here, i cant remember who though.

Its a white SII done 80,000 km, nearly dead stock besides bigger front lip and 17's. he paid $16500. Its very tidy.

Link to comment
https://www.sau.com.au/forums/topic/128666-r33-s1-vs-s2/#findComment-2455041
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 12+ months passed so they have no obligation to do a warranty claim. It leaked from the rear circuit. Front circuit was fine, but I tried many times to bench-bleed and in-car bleed (wasted 1L of Penrite racing brake fluid) to no avail. Threw my old BM50 or whatever the standard R32 GT-R BMC is, brakes went back to normal. So from my very limited anecdotal experience, I cannot recommend HFM, even though a lot of their products looks good. Just my experience (I have a genuine Nissan BM57 in a box waiting to be installed now).
    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
×
×
  • Create New...