Jump to content
SAU Community

Dump Pipe & Front Pipe

r32matt

By r32matt,
in Engines & Forced Induction

 Share

Recommended Posts

r32matt Collaborator

r32matt

Posted
Posted

Hi,

Im looking at buying a dump pipe and front pipe for my RB20DET. Im running a R34 turbo and was wondering which system would be best. I can either get the seperate dump and front pipe or the the dump pipe and front pipe in one. Buying them seperate is alot more expensive but I was wondering if it would be worth it? I was also wondering how much the boost will raise once i put the dump pipe on?

Thanks

Matt

post-28585-1154565056.jpg

post-28585-1154565069.jpg

Link to comment
https://www.sau.com.au/forums/topic/128668-dump-pipe-front-pipe/
Share on other sites
xRHETTx Mentor

xRHETTx

Posted
Posted

Check out BATMBL on this forum. His stuff is good, with split dump/front pipes available. But i'm not sure how you will go with havig an R34 turbo on an RB20, you might have to make some modifications.

clakka Collaborator

clakka

Posted
Posted

Mate just go the front and dump pipe in one because you won't need a screamer pipe (the one sold seperate) unless you are shooting for/have crazy horsepower...plus they are illegal and you will cop a massive fine and a nice yellow canary for the screamer.

I am getting the 2 together and they say you can raise it by about 2-4 psi but I would still be cautious if you don't have a FMIC or anything else...

clakka Collaborator

clakka

Posted
Posted

Sorry mate, thought I could be wrong, but have been told by a mechanic that that was a screamer...might not go to that mechanic again then hey...

However, frost is right you would need to get a front pipe fabricated and would probable cost a fair bit

Bliksem Veteran

Bliksem

Posted
Posted

Screamer is when the wastegate gasses are dumped straight to the atmosphere (ie the wastegate pipe doesnt plumb back in)

I would buy one of BATMBL's split pipes. He has a group buy running at the moment so just get one of those. If the R34 turbo bolted up to the stock R32 dump, then I'd say BATMBL's dump/front pipe should work ok (check with him first)

Munna1 Proficient

Munna1

Posted
Posted
Hi,

Im looking at buying a dump pipe and front pipe for my RB20DET. Im running a R34 turbo and was wondering which system would be best. I can either get the seperate dump and front pipe or the the dump pipe and front pipe in one. Buying them seperate is alot more expensive but I was wondering if it would be worth it? I was also wondering how much the boost will raise once i put the dump pipe on?

Thanks

Matt

The first one is certainly your best choice out of the two displayed. The separation of the pipes in the second one is not long enough this will cause too much turbulence where the pipes meet. Split dumps are good but there needs to be at least 30cm of separation before the pipes join.

The BATMBL split dump/front pipe would be a better option than the two displayed.

Cheers

r32matt Collaborator

r32matt

Posted
  • Author
Posted

Thanks guys,

Yeah I will get the Dump pipe and Front pipe in 1. Hopefully I will get a 2psi boost or more. Will the standard CAT be a problem? I wanna get a hi-flow but cant afford it at the moment, any cheap way of making my standard one hi flow? Im running 10psi at the moment which is standard. Will the boost be stable when running at 12psi or more? or should i put on my boost controller? (Turbotech Manual Boost controller).

Im running:

FMIC

R34 Turbo

K&N Air Filter

3 and a half inch form cat back

Lighten Flywheel

Extreme Clutch

Thanks

RANDY Veteran

RANDY

Posted
Posted

lol... well you have a few defectable items there already, so in theory you could just completely remove all the honeycomb from the cat, but it's illegal and I wouldn't suggest it for an onroad car.

Better off saving for an xforce 3" large body cat. They're about $300 from JustJap, and have the cat sensor thread in them already.

mad082 Grand Master

mad082

Posted
Posted
lol... well you have a few defectable items there already, so in theory you could just completely remove all the honeycomb from the cat, but it's illegal and I wouldn't suggest it for an onroad car.

Better off saving for an xforce 3" large body cat. They're about $300 from JustJap, and have the cat sensor thread in them already.

but the fine for a hollow cat is a few thousand dollars more than the fine for the rest of the defects. i got my x-force cat for $175 off ebay. and i agree with kennedy that a highflow cat will give a bigger power gain than a front/dump pipe if the stock cat is still there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • MBS206
      Most women will agree that parking is the most taxing part of driving

      By MBS206 · Posted

      It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...