Jump to content
SAU Community

Dump Pipe & Front Pipe

r32matt

By r32matt,
in Engines & Forced Induction

 Share

Recommended Posts

r32matt Collaborator

r32matt

Posted
Posted

Hi,

Im looking at buying a dump pipe and front pipe for my RB20DET. Im running a R34 turbo and was wondering which system would be best. I can either get the seperate dump and front pipe or the the dump pipe and front pipe in one. Buying them seperate is alot more expensive but I was wondering if it would be worth it? I was also wondering how much the boost will raise once i put the dump pipe on?

Thanks

Matt

post-28585-1154565056.jpg

post-28585-1154565069.jpg

Link to comment
https://www.sau.com.au/forums/topic/128668-dump-pipe-front-pipe/
Share on other sites
xRHETTx Mentor

xRHETTx

Posted
Posted

Check out BATMBL on this forum. His stuff is good, with split dump/front pipes available. But i'm not sure how you will go with havig an R34 turbo on an RB20, you might have to make some modifications.

clakka Collaborator

clakka

Posted
Posted

Mate just go the front and dump pipe in one because you won't need a screamer pipe (the one sold seperate) unless you are shooting for/have crazy horsepower...plus they are illegal and you will cop a massive fine and a nice yellow canary for the screamer.

I am getting the 2 together and they say you can raise it by about 2-4 psi but I would still be cautious if you don't have a FMIC or anything else...

clakka Collaborator

clakka

Posted
Posted

Sorry mate, thought I could be wrong, but have been told by a mechanic that that was a screamer...might not go to that mechanic again then hey...

However, frost is right you would need to get a front pipe fabricated and would probable cost a fair bit

Bliksem Veteran

Bliksem

Posted
Posted

Screamer is when the wastegate gasses are dumped straight to the atmosphere (ie the wastegate pipe doesnt plumb back in)

I would buy one of BATMBL's split pipes. He has a group buy running at the moment so just get one of those. If the R34 turbo bolted up to the stock R32 dump, then I'd say BATMBL's dump/front pipe should work ok (check with him first)

Munna1 Proficient

Munna1

Posted
Posted
Hi,

Im looking at buying a dump pipe and front pipe for my RB20DET. Im running a R34 turbo and was wondering which system would be best. I can either get the seperate dump and front pipe or the the dump pipe and front pipe in one. Buying them seperate is alot more expensive but I was wondering if it would be worth it? I was also wondering how much the boost will raise once i put the dump pipe on?

Thanks

Matt

The first one is certainly your best choice out of the two displayed. The separation of the pipes in the second one is not long enough this will cause too much turbulence where the pipes meet. Split dumps are good but there needs to be at least 30cm of separation before the pipes join.

The BATMBL split dump/front pipe would be a better option than the two displayed.

Cheers

r32matt Collaborator

r32matt

Posted
  • Author
Posted

Thanks guys,

Yeah I will get the Dump pipe and Front pipe in 1. Hopefully I will get a 2psi boost or more. Will the standard CAT be a problem? I wanna get a hi-flow but cant afford it at the moment, any cheap way of making my standard one hi flow? Im running 10psi at the moment which is standard. Will the boost be stable when running at 12psi or more? or should i put on my boost controller? (Turbotech Manual Boost controller).

Im running:

FMIC

R34 Turbo

K&N Air Filter

3 and a half inch form cat back

Lighten Flywheel

Extreme Clutch

Thanks

RANDY Veteran

RANDY

Posted
Posted

lol... well you have a few defectable items there already, so in theory you could just completely remove all the honeycomb from the cat, but it's illegal and I wouldn't suggest it for an onroad car.

Better off saving for an xforce 3" large body cat. They're about $300 from JustJap, and have the cat sensor thread in them already.

mad082 Grand Master

mad082

Posted
Posted
lol... well you have a few defectable items there already, so in theory you could just completely remove all the honeycomb from the cat, but it's illegal and I wouldn't suggest it for an onroad car.

Better off saving for an xforce 3" large body cat. They're about $300 from JustJap, and have the cat sensor thread in them already.

but the fine for a hollow cat is a few thousand dollars more than the fine for the rest of the defects. i got my x-force cat for $175 off ebay. and i agree with kennedy that a highflow cat will give a bigger power gain than a front/dump pipe if the stock cat is still there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...