Jump to content
SAU Community

Lowered My Car

CATKICKER

By CATKICKER,
in Tasmania

 Share

Recommended Posts

CATKICKER Mentor

CATKICKER

Posted
Posted

I just chucked in my Bilstein height adjustable shocks and super low King springs.

All in all, pretty easy job!

Here is a pic of how it sits now. I have been waiting ages to do this and I love it!!

It is rubbing in the front so I will have a look at that today. It goes in for bodywork tomorrow so I will have any guard rolling done then.

I still have to install my other suspension gear (ajd front and rear swaybars, adj camber kits, adj caster kit and rear subframe alignment kit) and get an alignment.

Has anyone had experence with what it might be rubbing on? I am not sure that it is that guard... Might be the arm and could have to get some 5mm spacers for the front. I can't even get my little finger in between the rear tyre and the guard so that will need rolling/trimming.

Anyway, here it is. Any comments welcome.

P.S. Might be an idea to have a sticky updates section so people don't have to create a new topic for somethin like this...

loweredqd9.jpg

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/
Share on other sites
CATKICKER Mentor

CATKICKER

Posted
  • Author
Posted

Cheers guys!!

I had a look today and it is rubbing on the screws on the guard that holds the plastic inner guard on. It is also rubbing when turning on the inner guard so will have to sort it out.

I will post an update when I get the car back from the bodyshop. I am getting my front bar, bonnet, front guard, rear bar, boot lid and tail lights painted and having my boot shaved, front guards rolled and rear guards trimmed...

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2386821
Share on other sites
nizmokid Mentor

nizmokid

Posted
Posted
yea wheels are wheels to me. my best mate had dished volk rims with a $4500 price tag but they dont look much better than a cheap set. just what i think anyways. but yea car looks sweet.

its the weight of the 2 piece wheels and the build quality, sit them next to a set of lenso copys and you would just pay the extra!.....trust me I did! and they look sweet as!.....go the VOLKS! :)

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2391043
Share on other sites
grandmasterb Grand Master

grandmasterb

Posted
Posted
its the weight of the 2 piece wheels and the build quality, sit them next to a set of lenso copys and you would just pay the extra!.....trust me I did! and they look sweet as!.....go the VOLKS! :)

I can see your point and it is valid but at the end of the day you cant see the wheels when your driving and they dont make the car go any better.

Its purely cosmetic so i have never been a fan of spending big on wheels for my cars, but thats just me and my 2 cents.

Dont get me wrong they do cap off a car (like Todd's) but i can think of better things to spend money on first.

Todd the car looks great cobber, must make a big difference with the handling now!!!

What have you got planned now for the beast seeing as your always doing something to it :)

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2391525
Share on other sites
CATKICKER Mentor

CATKICKER

Posted
  • Author
Posted

Thanks B.

Well, it is in the bodyworks at the moment like I said so it will be looking spot on when it comes out!

I now have GTR injectors and the resistor pack and a Z32 AFM so I will be looking at getting a retune.

I am tossing up whether to get Dr Drift to do it again or to go aftermarket. I am about to investigate SAFC's... Can anyone tell me if I can add the new injectors and AFM and tune it up with that or would I need to go the PFC?

I am not looking at taking it to Melb to get a tune because it is going to cost too much and I may aswel spend the cash buying something I can have tuned down here! I am thinking about getting Sam to send me another chip with a map to suit the injectors and AFM and then get the A/F ratios checked on a dyno down here. If nessecary, I could always send the ratios up to him and he can adjust it best he can...

Any help or suggestions on this would be great.

I rekon there will be a little dry period in 4 weeks... I am going to be a dad :devil:

Todd

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2391966
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • MBS206
      boost source Size Garrett gt28 gen2

      By MBS206 · Posted

      Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...