Jump to content
SAU Community

Lowered My Car

CATKICKER

By CATKICKER,
in Tasmania

 Share

Recommended Posts

CATKICKER Mentor

CATKICKER

Posted
Posted

I just chucked in my Bilstein height adjustable shocks and super low King springs.

All in all, pretty easy job!

Here is a pic of how it sits now. I have been waiting ages to do this and I love it!!

It is rubbing in the front so I will have a look at that today. It goes in for bodywork tomorrow so I will have any guard rolling done then.

I still have to install my other suspension gear (ajd front and rear swaybars, adj camber kits, adj caster kit and rear subframe alignment kit) and get an alignment.

Has anyone had experence with what it might be rubbing on? I am not sure that it is that guard... Might be the arm and could have to get some 5mm spacers for the front. I can't even get my little finger in between the rear tyre and the guard so that will need rolling/trimming.

Anyway, here it is. Any comments welcome.

P.S. Might be an idea to have a sticky updates section so people don't have to create a new topic for somethin like this...

loweredqd9.jpg

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/
Share on other sites
CATKICKER Mentor

CATKICKER

Posted
  • Author
Posted

Cheers guys!!

I had a look today and it is rubbing on the screws on the guard that holds the plastic inner guard on. It is also rubbing when turning on the inner guard so will have to sort it out.

I will post an update when I get the car back from the bodyshop. I am getting my front bar, bonnet, front guard, rear bar, boot lid and tail lights painted and having my boot shaved, front guards rolled and rear guards trimmed...

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2386821
Share on other sites
nizmokid Mentor

nizmokid

Posted
Posted
yea wheels are wheels to me. my best mate had dished volk rims with a $4500 price tag but they dont look much better than a cheap set. just what i think anyways. but yea car looks sweet.

its the weight of the 2 piece wheels and the build quality, sit them next to a set of lenso copys and you would just pay the extra!.....trust me I did! and they look sweet as!.....go the VOLKS! :)

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2391043
Share on other sites
grandmasterb Grand Master

grandmasterb

Posted
Posted
its the weight of the 2 piece wheels and the build quality, sit them next to a set of lenso copys and you would just pay the extra!.....trust me I did! and they look sweet as!.....go the VOLKS! :)

I can see your point and it is valid but at the end of the day you cant see the wheels when your driving and they dont make the car go any better.

Its purely cosmetic so i have never been a fan of spending big on wheels for my cars, but thats just me and my 2 cents.

Dont get me wrong they do cap off a car (like Todd's) but i can think of better things to spend money on first.

Todd the car looks great cobber, must make a big difference with the handling now!!!

What have you got planned now for the beast seeing as your always doing something to it :)

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2391525
Share on other sites
CATKICKER Mentor

CATKICKER

Posted
  • Author
Posted

Thanks B.

Well, it is in the bodyworks at the moment like I said so it will be looking spot on when it comes out!

I now have GTR injectors and the resistor pack and a Z32 AFM so I will be looking at getting a retune.

I am tossing up whether to get Dr Drift to do it again or to go aftermarket. I am about to investigate SAFC's... Can anyone tell me if I can add the new injectors and AFM and tune it up with that or would I need to go the PFC?

I am not looking at taking it to Melb to get a tune because it is going to cost too much and I may aswel spend the cash buying something I can have tuned down here! I am thinking about getting Sam to send me another chip with a map to suit the injectors and AFM and then get the A/F ratios checked on a dyno down here. If nessecary, I could always send the ratios up to him and he can adjust it best he can...

Any help or suggestions on this would be great.

I rekon there will be a little dry period in 4 weeks... I am going to be a dad :devil:

Todd

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2391966
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ben_D
      Wanted to buy R200 longnose LSD 3.9 ratio

      By Ben_D · Posted

      Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Ben_D
      Back for more after 18 years - and where are the longnose R200 LSDs?

      By Ben_D · Posted

      Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • sonicii
      G35 Control arm and Compression Rods into a V35 Skyline.

      By sonicii · Posted

      Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
×
×
  • Create New...