Jump to content
SAU Community

Recommended Posts

Thanks!

It not just a race car, it's also a show car so I keep it polished through the season thanks to my sponsor of polish from US. :D

The skull was put on the day after the tribals, an idea I got thanks to my back seat:

skyracer_skyline_backseat.jpg

/Håkan

Edited by Skyracer [SE]
' date='9 Aug 2006, 06:14 AM' post='2393800']

Thanks!

It not just a race car, it's also a show car so I keep it polished through the season thanks to my sponsor of polish from US. :D

The skull was put on the day after the tribals, an idea I got thanks to my back seat:

skyracer_skyline_backseat.jpg

/Håkan

i like this setup

What a mad race car, JDM yo

JDM ??? with tribals and a skull ? lol umm...ok

looks good mate, hot car, lovin the punch subs i bet they pump hard. have to agree though, the skull is a bit 2F2F for me.

Ok, it's like this, when we go to races we take out the sub and backseat to make it light. It is already fitted with lower springs. And no, we dont take of the tribals when we go racing, but however put in the big sub in the boot and setup in the backseat at shows. :D

So yes, it is a car used both at the nightly races and at the car show. :O

The look of the car does not have to be less than of a show car just to go racing. Or as a couple of friends visiting from AU said tonight "that car looks too good to go racing in" :D

Regards

Håkan

' date='16 Aug 2006, 06:43 AM' post='2413430']

Ok, it's like this, when we go to races we take out the sub and backseat to make it light. It is already fitted with lower springs. And no, we dont take of the tribals when we go racing, but however put in the big sub in the boot and setup in the backseat at shows. :D

So yes, it is a car used both at the nightly races and at the car show. :O

The look of the car does not have to be less than of a show car just to go racing. Or as a couple of friends visiting from AU said tonight "that car looks too good to go racing in" :D

Regards

Håkan

oh dude you are obviously not from Australia then... all makes sense now

I just opened up my dictionary and saw a pic of that car under the word 'rice'

and if thats a race car, what are the calsonic GTR's classified as? lol my mums pintara has lowered springs in it, if i took it to the track i guess thats a race car too.

Anyway personal opinion take of all the stickers and dump it, would be a nice 33, atm not rated

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...