Jump to content
SAU Community

Recommended Posts

Hiya guys,

I've got baked on window stains all over the rear window... it seems like all my previous imports have had this sorta stuff on their windows.. previously a razor blade and polish was all that was needed to remove it, but this one's a real stubborn bugger.

So how do i get rid of it?

Thanks heaps

Howie

Update ... problem solved

Before

windowgunk.jpg

After

after2.jpg

Edited by Howie

You need to use a descaler. Its hard water stains. You could try vinegar in some water. I would use the real stuff, Apple Cidar Vinegar. The stuff with brown floaty bits :P

Dilute in water and use on the windows. Don't drip it on paint work.

Edited by StageaGirl

Thanks SG. I'm beginning to think it's oxidized onto the windows, i'll need something with a bit of cutting power.... but i'll give vinegar a go.

Might have to get a detailer with an orbital buffer to have a go at it.

It's on the outside, rather than the inside so it's unlikely to be glue.

But i'll ask the professionals... i've seen this sort of oxidization on a soarer that we imported, it took a razor blade and several days to remove it completely, but this is far worse that that.

Interesting post I found on meguires online forum.

Glass polishing
Dont try this if you are not confident about your skills ... my car windows have acid rain i cant get rid of it... i try white vinegar, kerosene, windex, cigar ashes with no result... so after getting nutz (some may say what i do is crazy) i decide to go hard with this.

I use W-8000 yellow foam pad with Deep Crystal Paint Cleaner on a rotary buffer at medium low speed and it works well. But I was curious so i try something with more bite and use Compound Power Cleaner and it works magic.

Next time try this by hand with a piece of terry cloth or by machine with a W=7006 foam cutting pad.

#4 Heavy Cut Cleaner

product_m04.gif

It will work so much better than either of the two product you tried because of the type of diminishing abrasive this product uses. Next time you're around a bottle of #4 Heavy Cut Cleaner, shake up the bottle and pour a little into your fingers and then rub your fingers back and forth. You will easily feel the diminishing abrasives, (if you continue to rub your fingers together your will feel the diminishing abrasives breakdown and disappear).

Now, feel any of the products in the 80's series, such as the #84 Compound Power Cleaner in the same way and it will feel like you're rubbing a soft, smooth hand lotion between your fingers.

The difference is the 80's series uses microscopic diminishing abrasives while the traditional Mirror Glaze products use for lack of a better term, macroscopic diminishing abrasives.

It is this larger size diminishing abrasive particle that cuts, or slices through the film that has built up on the surface of your glass and polishes it off.

Liquid glass cleaners don't offer this polishing effect. When ever I detail a customers car, I'll almost always machine polish their glass with this system so that the glass is a glossy and shiny as the paint. When you do this and you've detailed the car correctly, the finished look jumps out at you! because everything on the car is gleaming.

In Oregon and Washington, I ran into a lot of people with horrendous water spots on their glass, as such, I have a lot of experience polishing glass.

Mike

Original Link

http://www.meguiarsonline.com/forums/showt...p;threadid=4930

Sounds good! I might give this a go. :dry:

You should check out that thread, the forum members decided to use it all over their bathroom and bedroom windows.. the results look great! lol

Edited by Howie

Update. Meguires forum was right.

Meguires Heavy Cut Cleaner (or Meguires Diamond Cut Polish) + a terry cloth + lots of elbow work will do the trick. And it also works on faded headlights for the R34 making them really crystal looking.

Mad082:

have you tried using some steel wool? works ok, but don't go overboard or you will scratch the glass. otherwise 1 of those green scouring pads.

Btw, the gentleman who distributed meguires suggested you do not try using a scouring pad or steel wool on glass, that is a huge no no. You definately need a Diminishing Abrasive, one that breaks down to a polish after it cuts or you end up with scratches that can't be removed.

Edited by Howie

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
    • Yes they do. For some maybe. But for those used the most by abusers, ie Skylines, the numbers are known. The stock eyebrow height for R32/3 Skylines is about 365/375mm or thereabouts. The minimum such heights are recorded in adjacent columns in the database.
×
×
  • Create New...