Jump to content
SAU Community

Recommended Posts

A week ago one of my headlights went out for no apparent reason as I just got new head bulbs... I thought ok... will fix soon.

Tonight as turned on my headlights, the second headlight went out too, it came on for half a second then went out! So now I only have driving lights working.

Wtf? lol

Im gonna try and put back my stock head light bulbs on tomorrow as I have aftermerket Jap headlight bulbs...

Anyway any ideas wtf is goin on?

Those headlights were roughly 8 weeks old.

Edited by Sir-D
Link to comment
https://www.sau.com.au/forums/topic/129611-both-headlights-went-out-now/
Share on other sites

first thing to check is the fuses. Chuck in the head light bulbs and then change the fuse.

Go turn on the head lights and see what happens, if they pop the fuse straight away it means that its shorting out somewhere. Either you have exposed wires or you have added some electronic gizmo recently which isnt wired in properly.

or are the new headlights the same as stock 12V / 55W ?

Yep, I can. haahah, any lighting questions, I am the sau guru.

Fuses are in the boot. in the battery compartment. pop off the cover.

It just takes normal 20cent blade fuses. Check them.

Have a look at the actual bulb itself. If you're not sure, take a good quality pic of both bulbs and post it up, i'll tell you if it's blown.

Chris

for an r33 s2 they are under the bonnet in the fuse box on the left hand side, there should be 1 fuse for left head light and 1 fuse for right head light, both are 20amp fuses, change these and you should be on your way.

you can get them from super cheap auto for about 2bux for a pack of 10 or so

Check the switch - they are a known problem in Skylines.

You can test the bulbs (you still haven't given any detail of the actual bulb) by running them directly off the battery for a few seconds.

Ok my head bulbs fried... funny cos they were MTEC, Japanese brand and only had them for under 2 months.

I fitted my old ones in and they were fine...I didnt know u need to have them inserted all the way in to test... +ve and -ve.

PS yes the fuses are under the bonnet, not in the back Manwhor3.

if they're those ones that have a blue coating on the lens then they probably overheated because the blue coating blocks light and turns it into heat, rather than radiating 99.9% of the light as a conventional clear-glass globe would do.

get a set of narva plus 50's and forget about all that cool white, HID look-alike crap!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...