Jump to content
SAU Community

Rb26 With Rb20/25 Afm's

OFENSV

By OFENSV,
in Engines & Forced Induction

 Share

Recommended Posts

OFENSV Proficient

OFENSV

Posted
Posted

just wondering how much power rb20/25 afm's will support on a R32 gtr? I see most people use the z32 afm's but they are quite alot more expensive. Was reading an old zoom mag and they said to use the rb20/25 afm's. Im aiming for about 300 - 320awk. Will thse do the job? Also do the wires for the plugs need to be changed around or are they straight plug in?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/129803-rb26-with-rb2025-afms/
Share on other sites
tacker Mentor

tacker

Posted
Posted

plugs are the same but the flex hose will fit if you try really hards LOL. you will need a re map thought as i did this to find it was very lean on the air fuel ratio.

Cheers mate. looking at that then 2 rb20/25 is plenty for what im after. You know if the plug or wirring needs to be modified to fit to a rb26?
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Interesting people have not steered ytou on the straight line!!!

You'll be able to get away without changing the AFM's

Ferni did using GT-SS i believe, and im also gonna give it a whirl on my very similar setup :P

Munna's "rule of thumb" is totally wrong in its power readings.

Z32's/Q45's read a fark load more than 250/300rwkw respectively

Although its more about airflow than power anyway

OFENSV Proficient

OFENSV

Posted
  • Author
Posted

well maybe i should keep the cash and go for the tune straight away with the standard afm's. im running hks 2530's pfc and have a set of sard 700cc injectors to through in. Think i should invest in a pump then instead of afm's.

Is it possible to put an external 044 inline with the standard pump without using a surge tank?

32R Apprentice

32R

Posted
Posted
Hi, I have R32 GTR with standard afm's and 375 kw at the rears on 18psi. Havent tried to push them any further yet though. Hope this helps. :thumbsup:

Do you have a Power FC?

What is the max voltage you see, as i regularly see 5.1volts with 310hp(230kw?) at the wheels.

Anyone else maxing there AFM at similar power level?

OFENSV Proficient

OFENSV

Posted
  • Author
Posted
Do you have a Power FC?

What is the max voltage you see, as i regularly see 5.1volts with 310hp(230kw?) at the wheels.

Anyone else maxing there AFM at similar power level?

So you say you standard 26 afm's a maxing out at only 230rwk? something cant be right there. They both read that?

SCOOP Enthusiast

SCOOP

Posted
Posted
Do you have a Power FC?

What is the max voltage you see, as i regularly see 5.1volts with 310hp(230kw?) at the wheels.

Anyone else maxing there AFM at similar power level?

Hi, yes I do have power FC. Im not sure about the volts, I dont realy play with my FC, But Ill try to find out for you next time I drive it.

32R Apprentice

32R

Posted
Posted
So you say you standard 26 afm's a maxing out at only 230rwk? something cant be right there. They both read that?

Yeah mate I know, I"ve read the tables too,with 400hp atw apparently the limit on std AFM(or Scoop may prove us wrong)

But they both read roughly the same,using the sw check they seem to fluctuate within a few millivolts of each other.

Could also be due to the cold weather as I never noticed them sitting that high in the summer.

It would be interesting to see other peoples power and peak voltage..

SCOOP Enthusiast

SCOOP

Posted
Posted

Hi guy's, first up Im not a tuner and I dont claim to know much about tuning. Im trying to learn but its all beond me, give me a chev with a holly carb and I can tinker with that just fine. Anyway my AFM are maxed out [no tuneing resolution] but they still flow the air to support the power. That is the way it has been explained to me, and that is all I can go on. What power would I need to run 10.9 @ 127.4 mph? Fair bit of wheelspin through first gear. This was my first time out with the car as we'll. :(

OFENSV Proficient

OFENSV

Posted
  • Author
Posted
Hi guy's, first up Im not a tuner and I dont claim to know much about tuning. Im trying to learn but its all beond me, give me a chev with a holly carb and I can tinker with that just fine. Anyway my AFM are maxed out [no tuneing resolution] but they still flow the air to support the power. That is the way it has been explained to me, and that is all I can go on. What power would I need to run 10.9 @ 127.4 mph? Fair bit of wheelspin through first gear. This was my first time out with the car as we'll. :D

You ran a 10.9? or your asking how much power you would need? What turbos are you running?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Danowner
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By Danowner · Posted

      Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Julsmadrid
      RB25det

      By Julsmadrid · Posted

      Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • soviet_merlin
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By soviet_merlin · Posted

      Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • Danowner
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By Danowner · Posted

      I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      Great pic  
×
×
  • Create New...