Jump to content
SAU Community

Recommended Posts

just wondering how much power rb20/25 afm's will support on a R32 gtr? I see most people use the z32 afm's but they are quite alot more expensive. Was reading an old zoom mag and they said to use the rb20/25 afm's. Im aiming for about 300 - 320awk. Will thse do the job? Also do the wires for the plugs need to be changed around or are they straight plug in?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/129803-rb26-with-rb2025-afms/
Share on other sites

plugs are the same but the flex hose will fit if you try really hards LOL. you will need a re map thought as i did this to find it was very lean on the air fuel ratio.

Cheers mate. looking at that then 2 rb20/25 is plenty for what im after. You know if the plug or wirring needs to be modified to fit to a rb26?

Interesting people have not steered ytou on the straight line!!!

You'll be able to get away without changing the AFM's

Ferni did using GT-SS i believe, and im also gonna give it a whirl on my very similar setup :P

Munna's "rule of thumb" is totally wrong in its power readings.

Z32's/Q45's read a fark load more than 250/300rwkw respectively

Although its more about airflow than power anyway

well maybe i should keep the cash and go for the tune straight away with the standard afm's. im running hks 2530's pfc and have a set of sard 700cc injectors to through in. Think i should invest in a pump then instead of afm's.

Is it possible to put an external 044 inline with the standard pump without using a surge tank?

Hi, I have R32 GTR with standard afm's and 375 kw at the rears on 18psi. Havent tried to push them any further yet though. Hope this helps. :thumbsup:

Do you have a Power FC?

What is the max voltage you see, as i regularly see 5.1volts with 310hp(230kw?) at the wheels.

Anyone else maxing there AFM at similar power level?

Do you have a Power FC?

What is the max voltage you see, as i regularly see 5.1volts with 310hp(230kw?) at the wheels.

Anyone else maxing there AFM at similar power level?

So you say you standard 26 afm's a maxing out at only 230rwk? something cant be right there. They both read that?

Do you have a Power FC?

What is the max voltage you see, as i regularly see 5.1volts with 310hp(230kw?) at the wheels.

Anyone else maxing there AFM at similar power level?

Hi, yes I do have power FC. Im not sure about the volts, I dont realy play with my FC, But Ill try to find out for you next time I drive it.

So you say you standard 26 afm's a maxing out at only 230rwk? something cant be right there. They both read that?

Yeah mate I know, I"ve read the tables too,with 400hp atw apparently the limit on std AFM(or Scoop may prove us wrong)

But they both read roughly the same,using the sw check they seem to fluctuate within a few millivolts of each other.

Could also be due to the cold weather as I never noticed them sitting that high in the summer.

It would be interesting to see other peoples power and peak voltage..

Hi guy's, first up Im not a tuner and I dont claim to know much about tuning. Im trying to learn but its all beond me, give me a chev with a holly carb and I can tinker with that just fine. Anyway my AFM are maxed out [no tuneing resolution] but they still flow the air to support the power. That is the way it has been explained to me, and that is all I can go on. What power would I need to run 10.9 @ 127.4 mph? Fair bit of wheelspin through first gear. This was my first time out with the car as we'll. :(

Hi guy's, first up Im not a tuner and I dont claim to know much about tuning. Im trying to learn but its all beond me, give me a chev with a holly carb and I can tinker with that just fine. Anyway my AFM are maxed out [no tuneing resolution] but they still flow the air to support the power. That is the way it has been explained to me, and that is all I can go on. What power would I need to run 10.9 @ 127.4 mph? Fair bit of wheelspin through first gear. This was my first time out with the car as we'll. :D

You ran a 10.9? or your asking how much power you would need? What turbos are you running?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...