Jump to content
SAU Community

Recommended Posts

today i parked my car as usual on cemetary road (wont be parking ther EVER again) and when i came back to it the left side back panel (would have been over the fuel cap if it was on the right if u get me) was keyed real badly, two big ones bout 30-50cm long each and they tookall the paint clean off, ****ing pricks, im so cut, im never parking my car anywhere for longer than 15mins again unless im close by, im gunna catch public transport every day into uni now just coz of some little top bloke who is jealous of my car :D:(:)

does anyone know basically howe much it would cost to get the area resparayed ? car is black

Link to comment
https://www.sau.com.au/forums/topic/12991-my-car-was-ing-keyed-today/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Depends on how many panels involved and how close the scratch to the next panel. If it's too close, the panel beater might need to paint to panels at least to blend the colours in. But since you have black car, I suppose it's not as hard as any other colour.

I had done about $600 respray for two panels (rear quarter & door) on my previous car with metallic baby blue colour.

yah my friends black lude got keyed aswell

all the way from front panel to rear panel

it'll cost yah about $500 to buff out and paint over

yeah ****in hate people that do that

jealous or have a grudge against yah

get a sensor alarm that pics up motion

poor nathan

i feel sorry for ya...but u cant help it

wherever u park if stoopid ppl like them around is still gonna do stoopid things to the cars...just try to pray and watch out next time

park in public area where everyone sees...mite be better:)

i got a keyed area too...but just slightly so never quoted to get it fixed...hope u get it resprayed again soonish:)

thats ***ing shite nathan... park it there again... same time... leave a note on it... "to the wanker who keyed my car... look bitch its fixed"

wait behind a bush with a big bat (can borrow mine if u want) and wait...

hee thats a tempting thing to do narky, but i think ill stick with the leave it in the garage and only drive it somewhere where ill always be with it, and public transport to uni every day :D man im so depressed, i guess u guys will get to scope it out tomoorow at goodguys

im telling you, everyone needs a standared issue beating stick, i made one out of aluminium for beating up an annoying co-worker (im technically his boss as im older plus im the heir to the business :D) sucks though getting the car keyed, makes it worth it to buy a daily driver, but then again how can u enjoy ur skyline when ur paranoid about it most the time

its the name of my aluminum mini basball bat... its got a few dents in it from when i was younger and a bit of a loose unit... my cousin prefered the wooden bats... one still has teeth marks in it.

meh ive calmed down heaps now..

anyways... back on topic... sorry to hear nathan but i wouldnt worry.... rest ur mind in the fact that they will get there comeupense... COMEUPENSE!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...