Jump to content
SAU Community

550cc Injectors Rb20det Cleaned And Flowed

samc2ltt
 Share

Recommended Posts

samc2ltt Contributor

samc2ltt

Posted
Posted

550cc injectors for rb20det performeance up grade bought them for my car for turbo upgrade then never went ahead with it. good for over 300rwkw getting hard to find.

400$

pm inquires set of 6

samc2ltt Contributor

samc2ltt

Posted
  • Author
Posted

located in melbourne, bought them of -r32nismo- i think he's pretty big on the forum he had them cleaned and flowed so ask him to confirm that or your welcome to have a look i never used them, offers are goinh to have to get a bit more serious. i forgot i also have a stock rb20det fuel rail i'll throw in.

samc2ltt Contributor

samc2ltt

Posted
  • Author
Posted
mate my offer was serious because thats all they are worth if they include plugs.

you buy a set for that much then mate i bought them for 370 my self and want around that backi already have offers above yours

samc2ltt Contributor

samc2ltt

Posted
  • Author
Posted
ive already bought a set for a customer for 300 with plugs

i sold a set of gtr injectors for 350 a few months ago and these are better flow more and don't need a resistor pack, i bought them only six months or so ago for 370, clean and flow is around 30$ each injector if you walk in off the street. they have the tooth filled down so stock plugs fit and have a fuel rail so you can drill a beez dick to fit these injectors so for around 370 $ it's good value.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Duncan
      R33 GTR running -9 with no tune

      By Duncan · Posted

      Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Duncan
      Coolant leak?

      By Duncan · Posted

      Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...