Jump to content
SAU Community

Recommended Posts

I must admit, that Black R33 GT-R was sweeet. But so was the supra and the 2 z32's. Saw a nice R33 GTSt for sale while I was at the car show, white, sunroof, bodykit, exhaust, 67000kms, carbon dash, but I lost the bloody mobile number.

  • 5 weeks later...

FYI R33 black veilside body kit. lots of power 270 odd kw at wheels.

Silver R33 not quite stock AP 6 pistons on front cage nardi wheel semi-slicks, going to be run in targa as UK spec N1 cooler etc.

Black 32 Australian delivered 33 wheels brake upgrade,

Burnt orange GTR R32 (rego) exhaust and cooler ????

Burgandy R32 Australian delivered basically stock R33 turbos with steel wheels running 8psi(std), HD clutch, total engine rebuild 11000 kms ago. Pagid RS4-2 brake pads(very big improvement). exhaust shortly. Also badly in need of tyres....... Falken Azenis AZRT215 i think will b the choice

it is my car :)

Other Datsuns I have seen and think r Tasmanian

White 34 V-spec at Symmons plains WHR

R34 N-1

black 33 volk wheels

R33 N-1 mines

black 33 V-spec X-targa

silver 33 set up for Targa?????

white 33 followed on bridge the other day :(

  • 2 weeks later...
Guest TazR32GTR
Originally posted by no_gtr_yet

FYI R33 black veilside body kit. lots of power 270 odd kw at wheels.

Silver R33 not quite stock AP 6 pistons on front cage nardi wheel semi-slicks, going to be run in targa as UK spec N1 cooler etc.  

Black 32 Australian delivered 33 wheels brake upgrade,

Burnt orange GTR R32 (rego)  exhaust and cooler ????

Burgandy R32 Australian delivered basically stock R33 turbos with steel wheels running 8psi(std), HD clutch, total engine rebuild 11000 kms ago. Pagid RS4-2 brake pads(very big improvement). exhaust shortly. Also badly in need of tyres....... Falken Azenis AZRT215 i think will b the choice

it is my car :(

Other Datsuns I have seen and think r Tasmanian

White 34 V-spec at Symmons plains WHR  

R34 N-1

black 33 volk wheels

R33 N-1 mines  

black 33 V-spec X-targa

silver 33 set up for Targa?????

white 33 followed on bridge the other day :)

Hi All, Tim and Alex

The black r32 mentioned above belongs to me.......:(

Damien

Hi Damien,

I've ordered the wheels for the GTR. They're still a few weeks away.

I tried an aftermarket computer in it and it was a dismal failure. I won't name the computer because it was given to me on a try and see basis by the manufacturer and was I suppose a bit of a development exercise but it did not adequately control the fuel or the ignition. I think I'll probably put an Autronic in it as the one I have in the WRX seems to be pretty good.

Tim.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...