Jump to content
SAU Community

Recommended Posts

  • Replies 245
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

nizmokid: On the street you'd probably won't notice much difference.

Swapping disc alone won't immediately give you better braking performance,

there's a lot other factors you need to consider: pads, fluids, is your std

rubber lines getting old, etc. For example even if you have brembos but your

fluid is sh1t and pads are worn, it's not gonna work well.

What it does with the slots are you can expect getting a lot more consistent

performance after going hard for 4-5 laps (on the racetrack - not street, please)

which is due to better cooling and reduce of buildup dirt/gas/water between the pad

and rotor surface. But even if you don't take it to the track, on the street you may

have a little bit better performance in stopping if your other brake components

are in good nick condition. Plus it looks better, and good value for money if you

need to replace your worn out rotors

r33fourdoor: there's R31 GTS in the xls list. So I'll put your mate in.

$302.50 without 20-25% discount. See 1st post in this thread. I haven't got exact $ on freight, but they're willing to organise to distribute to the closest RDA branch in your major city so even if you need it delivered, a local metro delivery in your city wouldn't cost much.

Yeah why not put me down for a pair of front slotted for r33 gtst series 1, providing they will fit with standard wheels on there

hey im after a full set front and rear for a R33 GTR V-SPEC ( brembo's ),

324mm front and 300mm rear can tou posta cost or a pm please im very keen just in process now of buying

cheers mike

trick: i've put you in. will let you know final price after discounted, if you're not happy with it u can pull out of the group buy, no worries.

r33skyliner & operationsideways, list updated on 1st post

dd4321, I'll start with the ordering next week, so as soon as I've sorted out the price and payment, then perhaps it's possible to get it in the next 1 or 2 weeks.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I was getting anxious with the DVLA not knowing if the paperwork is fine or not, so I rang them. No update had been given, but I  was reassured that providing the box was ticked on the V750 then the application will go through fine. I've been checking the DVLA website pretty much every day, in the hope that it would have been done. Fast forward to Monday 29th  and I was greeted with a new screen on the check, and it finally showed as Taxed and MOT'd, woohoo! The car was in desperate need of a clean, not knowing when this day was coming it was put off. As far as I was concerned I had another 3 weeks  I'm not normally one for using snow foam, but I wanted to give it another try It hasn't cleaned up too bad considering it's 21 years old and lived on a boat for a number of weeks. The personalised number plate is J2 XBK, an illegally spaced number plate would have it read J2X BK. BK could either represent  the colour black or Baker, which is my surname. I filmed the first drive, the Youtube link will be at the end. I used the same driving route I did with the 323F V6 when I had a new exhaust installed, heres a couple of photos A few more since then Youtube video can be viewed here: https://www.youtube.com/watch?v=TjkFHPzjGDw
    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
×
×
  • Create New...