Jump to content
SAU Community

Recommended Posts

Hey, just put a new rb20 in my r32. Its running a HKS2530, 5500ccinj, microtech etc. was driving it hard the other night, and noticed i could hear a very loud "ticking" sound from under the bonnet.

i pulled over and checkd under the bonnet, and it sounded like a lifter on the intake side. whilst idling at 1000rpm, the red oil light would come on, revs drop, then go off, and revs pick up. it would repeat this.

the standard oil pressure guage also reads very low. I am pretty sure my last engine died of the same symptoms, would blocked turbo lines cause this? Anyone got any ideas?

Link to comment
https://www.sau.com.au/forums/topic/130884-is-my-oil-pump-dead/
Share on other sites

hey dude. what oil do ya run? If ya got the money get rid of the standard oil pressure gauge ther so dodgey! I put a electric aftermarket in mine cos i was worried bout the low reading! Mine runs 100psi when cold and 50psi warmed up cruzn on the high way... 80pound when ya give it a gut full and 35 40 pound at idle.. oil is castrol edge 5w30 fully synthetic.

yea im using penrite 5-40w synthetic blend, went in a week ago with a new filter. The lifter(s) were REALLY loud, like it had NO oil whatso ever.

but its full, and theres no leaks. I wouldnt be so worried if it was just the oil pressure guage. I plan on getting one of the Justjap gauges..

my oil return line from turbo has a kink in it, and may be restricting flow, would this cause low pressure?

Oh yeah man.. That is on of ya main feeds from the oil pump... i think but it should just blow ya pressure rellief in ya pump not a expert but i dont like bein a know all (",) hope ya havent done any damage to that nice turbo but! Wish i had one....

As I understand it the oil return from turbo is under no pressure and is just gravity fed back to sump. So I would say its not the cause

But having that kink could slow down the oil return process and possibly back up the return pipe to the point its struggling to get out the turbo and blow seals?

Am I on the righ train of thought?

I'd say oil pump as the factory light goes off at really low pressures (under .5 bar) and is less prone to failure than the dodgy factory gauge. For it to be on at idle, combined with the noisy lifters is almost definately pointing at a pressure problem, whether the pump or a pick up problem (you don't have a dented sump by any chance?).

As fatgts-r has pointed out, the kink in the return line is doing you no favours but would more than likely result in a smokey turbo rather than an oil pressure problem as it is only a low pressure return to the sump. Even blocked oil feeds to the turbo should result in a higher system pressure rather than lower (and again, not so good for the turbo).

You'd know the difference between noisy 550 injectors and lifters too i'd bet so i won't go there :rofl: Not that you can hear the injectors clicking away from in the cabin.

ok, started it up this morning, i changed the oil filter for the hell of it, and topped it up with oil. The stock guage went up showing pressure, just below the 4. No lifter noise, and sounded perfect. I rekon ill get a proper pressure gauge before i take it anywhere.

just put a oil presure guage on. theres only one way to know. also blocked turbo oil lines wont cause this problem.

do you have a remote oil filter thingy on.?

ive seen people put them on backwards so the oil has alot of trouble flowing backwards threw the filter

whilst idling at 1000rpm, the red oil light would come on, revs drop, then go off, and revs pick up. it would repeat this.

This is the strange part, as its a new motor have you checked all your earths? Maybe a bad earth is causing rpm drop and as a coincidence the oil light to show? A stab in the dark but its worth a look.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...