Jump to content
SAU Community

Recommended Posts

hey guys just selling my RB26dett

the engine includes CP pistons , cryo rods and crank , arp head stud kit , n1 oil pump , new water pump , cametic head gasket, jun cam gears , port and polished head , acid dipped block, bottom end done by bryants engineering and head done by barkleys , also comes with rb26 gear box , the turbo is a GT40 1.06 rear and a .50 front the front housing is polished , with high mount manifold , genuwine tial waste gate with screamer, comes with twin R33 air folw meters .custom pods to fit , dump pipe to suit 3 inch , 650 injectors , sard fuel reg, power fc with hand contoller gates timing belt , gates radiator houses , ford blue tapper covers , poilshed plenum , 5000 k old 5 puck brass button 3800 foot pound nismo clutch all braded lines all piping is polished, engined is tuned by mark at godzilla motorsports , currently making 507hp the all 4 wheels only only 21 pound plenty more in it , the motor is still in car so you can see how it is running , the motor is healthy as ever only done 5000k's since rebuild never drivin on 507 hp only tuned as i never got around to getting a boost controller only ran 16 pound making 430 at the wheels awsome motor for GTst or what ever the rebuild cost me 9000 selling everyting for 8500 ono , 10 sec motor im in brisbane will send any where prefer brisbane , matt 0422883933 thanks got dyno sheets dont really wanna seperate the things the engine is coming out of a R32 cheers if want photos ask pm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...