Jump to content
SAU Community

Recommended Posts

Hey guys, first post here, just want to say first that it looks like a great community you got here!

So my old man wants to get a skyline for us to share, problem is we don't know much about them. I've done some homework on skylines and read through various FAQ's on SAU including the detailed "buying a skyline" thread. However, there's still a few specific questions i've got.

Firstly where to buy... should i be looking at places like carsales.com.au or car yards eg. JSA (what are someother skyline importers in Vic, i hear JSA's pricey?)

The "buying a skyline" thread had a lot of good information but i was still wondering how can you tell if the turbo is about to die... will a RACV inspection or dyno / engine compression test reveal this information? Is an aftermarket turbo timer a good sign or bad sign?

I'm currently looking at an R34 GTT, (what should one pay for a decent R34 GTT?) but my mind can still be easily moulded in a different direction. :/

Lastly i've checked the stats on a R34 GTT, around 205 kW with a weight of only 1400kg, (is this right?) which means it's over the 125kW/tonne legal ratio for P platers. If this is true, what forced induction skylines can P platers legally drive in Victoria, if any?

Thanks heaps if you can answer any of these questions! :laugh:

Link to comment
https://www.sau.com.au/forums/topic/132321-firstime-skyline-in-melb/
Share on other sites

1. private sale will yield a better car for less $ and generally avoid dodgy dealers

2. an racv test will check general mechanics, much like a normal mechanic can. no one can really tell you if the turbo is about to die. they dont die very often

3. a turbo timer means nothing

4. for a decent r34 gtt i would expect around 30k

5. yes r34 gtt is over power to wieght rule for p platers, so is the r33 gtst. r32 gtst is NOT. driving a car over power to wieght can void any insurance and you will also be fined each time if you are caught, they have power to impound your car if caught several times

I agree with the private sale as opposed to a dealer, alot of dealers sell fresh imports some of which can have various issues, where as if you are buying from a private seller especially an enthusiast there is generally less probability of things going wrong and all the 'little bugs' have been fixed. It also tends to be cheaper.

My advice though decide what you want first car, colour, k's, mod's or stock etc. and then go look for it, don't buy the first car you see or settle for something your not sure on because there's nothing else at the time. Makes for much more happiness in the future.

As to the power to weight thing, how old are you and how much longer you have left on your p's??? I'm not sure about the TAC/VicRoads insurances etc. but car insurance companies such as Just Cars will insure you to drive a high powered vehicle, but because you are still a new driver, you rating will be high so it ain't cheep and excess will also be high.

From my experience's don't drive like an idiot and the police will leave you alone.....mostly......

I wouldn't just limit yourself to look for a car in Vic. I have just purchased my R34 GTT 4dr from QLD and it is getting transported to Vic. I can highly recommend contacting forum member jake32 :/ if you are looking for an R34, if you PM him, he may be able to help you. As well as having high quality vehicles, he was extremely helpful and very trustworthy. :laugh: To purchase the vehicle without seeing the car myself I relied on his word and State Roads to perform a complete a comprehesive inspection, including compression test on the engine (I would highly recommend State Roads, way better than RACV).

:rofl: I have had a very positive experience on purchasing my R34, so hope this info gives you some idea. Good luck with the car hunt and do lots of research.

Thanks guys for the quick responses!

Hmm so it seems hopes for a skyline are dashed.. for the mean time!

From my experience's don't drive like an idiot and the police will leave you alone.....mostly......

Is it uncommon for cops to be in the know if you're driving a "high powered vehicle," just by looking at the car even if you're not being a goon on the road? Just curious, what penalty does it incur if you are caught in a "high powered vehicle" on your P's ?

there are those that know and those that dont know exactly which cars are over....if its a 33 or 34 and they know its turbo, then chances are they'll knows its over and get you if they feel like it....

It doesnt seem to be the most enforced law however...

The fine is around $100 and no points as far as i'm aware...

Hey guys, first post here, just want to say first that it looks like a great community you got here!

So my old man wants to get a skyline for us to share, problem is we don't know much about them. I've done some homework on skylines and read through various FAQ's on SAU including the detailed "buying a skyline" thread. However, there's still a few specific questions i've got.

Firstly where to buy... should i be looking at places like carsales.com.au or car yards eg. JSA (what are someother skyline importers in Vic, i hear JSA's pricey?)

if u're in VIC, do not approach ULTIMATE PERFORMANCE. They f**ked up my bro's Skyline for compliance

-work was not done to standards and the car was sent back

and when things were fixed up,

- the f**ker forgot to give me the full paper work to take to VIC roads for compliance.

Big time wankers

your post wont last long....

But if you're talking about UPI, then i'll have to add that there was no issues with workmanship on my car whatsoever.

While being compliance I also got my timing belt, water pump and all other belts, pulleys etc changed...all fluids changed using premium. No complaints on workmanship.

If i didn't live so far away, i'd probably take my car there for performace stuff as well :/

Yeah look, unfortunately good dealerships are few and far between. But they are out there, just look around. As already mentioned, JSA and UPI also Carizma.


Private sales you have to endure the same crap you do when buying any car.

Just Cars seems to be the place to insure your car.

Get it checked over by a qualified mechanic.

DON'T GET SCREWED! Very easy to!

Edited by Savage Bliss

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...