Jump to content
SAU Community

Recommended Posts

hey guys, i can't believe i've had my car for almost a year now and i only JUST noticed that i have a little green plug up front that's unplugged!!

Everything in the car works ok, except for my boost gauge...but i'm confused as to wtf that little green thing is supposed to do?! is it simply the connector to make the boost gauge work? i didn't just want to plug it back in without knowing what it's supposed to do first...

post-23511-1157082815.jpg

Link to comment
https://www.sau.com.au/forums/topic/132509-what-does-this-green-plug-do/
Share on other sites

well that's what i thought too but the temp gauge is working..

in my car, thats a sensor to switch the thermo fan to the higher speed

but you have a clutch fan, so im not really sure

someone with an r33 should be able to help you

I'm pretty sure that plug connects the thermo fan on the front of the radiator, which only comes on when coolant/engine hits a certain temp - nothing to do with the boost gauge I'm afraid.

Perhaps check to see if the MAP sensor for the boost gauge is also disconnected (little black box tucked away down the back of the engine bay in the driver-side corner)...should have an electrical connector and a vacuum hose connected.

It plugs into the other green plug, on the radiator!!!! That leads down to the thermo switch in the bottom tank that tells the A/C thermo fan (the one out front of the radiator) to switch on when the coolant starts to get a buit too hot.

Thats the connector for the thermo switch that turns the sub cooling fan on. Its an extra fan incase the engine is idling and the clutch fan isnt doing enough revolutions to create sufficient airflow to cool the engine coolant. I think it also comes on when you switch your AC on, but my AC has never worked so i cant back that up. But it would make sense as there is no way of electronically switching on a heat activated clutch fan!

Thermo fan man. That's where mine goes, and I have to unplug it to take the radiator out. If you've had the timing belt changed or something like that recently, then someone left it unplugged.

Does the A/C condenser core have a seperate fan to the one we're talking about???

man what's going on... in that pic you sent there's clearly another plug that it goes into... did you not see it??

lol, true true, we all saw it, but no one stated the obvious.

just plug it in, it's even colour coded. then whatever it does, it'll do it. done

Thermo fan man. That's where mine goes, and I have to unplug it to take the radiator out. If you've had the timing belt changed or something like that recently, then someone left it unplugged.

Does the A/C condenser core have a seperate fan to the one we're talking about???

:)

i think you're right on the money, i had the timing belt and water pump replaced a few months ago and they probably forgot to plug it back in..

and yes i was going to plug it back in but i just wasn't sure what it would've really done

thanks for the feed back guys!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...