Jump to content
SAU Community

Recommended Posts

maybe the Ferodo DS3500? but i've heard there not very good road pads. You'd be the first i've heard that wasn't impressed with the 2500's though.

Apparently Prodjuct Mu pads are good, but again, only going on what I've read around the place on here.

theres RaceBrakes RB74's that alot of people use an recomend but say once over heated once there not real crash hot?

check out www.nismo.com.au too, they have a few options with brake pads an different temp ranges

hope this has been of some help, Cheers

Berin

I too am surprised about the comments with the DS2500's???

Due to current brake set up i am using endless NA-R's which i have found to hold up quiet well. They warm up quiet quick and will hold on for quiet some time before getting some ever so slight fade but usally only after 15min full pelt around the track. They would be a good pad for super sprint and then drive home on them road use.

I've swapped from RB74 to DS3000, found the DS3000 much better so far (but thats what i was expecting). I have also used the DS2500's on the M3 Driver training day, they run them in thier driver training cars on the track at philip island, they coped a beating all day, lap after lap for like 20-30 laps at a time with no fade or problems.... maybe the 2500's you had were fake or a dud set? find it hard to belive the bendix stuff was better.

Yep i have the project Mu level 900 on the front bendix ultima on rear, nismo steel braided lines, standard gtr calipers and RDA slotted standard size rotors and lots and lots of brake ducts.

I can get through a 20 minute track session with just the smallest amount of fade, pedal drops about 20mm. And the ambient temp was 40 C +.

BUT they dont come cheap.

  • 2 weeks later...

well.....hawk black = race pads = not for road use.

Thats how I see it, I am happy with their performance for race use, been using them all year, they seem better than the SBS pads I used before that. But race pads is a different topic I think.

  • 3 months later...

As a street/track pad my only experience has been with Ferodo DS2000 and have dfound them to be very good, but it has been my only experience.

PS-Sorry to bump something a few months old

Edited by JZX91-2JZ

I have project Mu pads and rotors on the front, they take a while to get up to temp, and are average when they are cold, but on the track they are great! I have only had the slightest brake fade, and that is after a lot of 200kmh stops.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...