Jump to content
SAU Community

Recommended Posts

Only just got my GTR back from the workshop with the new addition of forged pistons and still have 500 k's before im over the safe 1000. Only been boostin it to 4000 just to run it in. It has N1's which start spooling at 2500 so it still puts you back but every now and then it feels like it doesn't want to boost. Im thinking its something to do with the turbos?? Don't know much cause the last turbo i had was in a 1 litre charade and that was only to give it enough power to get up the hills :)

Link to comment
https://www.sau.com.au/forums/topic/132706-lag/
Share on other sites

You on a standard tune, could be boost cutting as it hits 4000rpm if you've upped the boost from standard without remapping the ECU and removing all that business.

If they start spooling at 2500 youd be near full boost by 4000rpm i would think... or is it immediately after they start boosting?

In which case I'd check for things like leaks, wastegate, disconnected lines etc.

Can you be a bit more specific, does it surge, or just plateau out, or cut out all together in terms of boost when you say "it doesnt want to boost"

Link to comment
https://www.sau.com.au/forums/topic/132706-lag/#findComment-2458781
Share on other sites

what boost are you running, and what is controlling the boost? if you have a boost controller then it may be slightly blocked and not releasing the air between it and the wastegate, so when you try to accelerate the wastegate is still open and it won't spool up properly.

Link to comment
https://www.sau.com.au/forums/topic/132706-lag/#findComment-2460155
Share on other sites

I've talked to my mechanic about it and he reckon's its the coil pack without looking at it. He said the first time he started it up it was only running on 5 cylinders then after a couple of minutes the 6th picked up. Thinking about it, it makes sense if its a firing problem. I said it was 'every now and then' and most of the other time it's great. At 4000 it doesn't feel like it going to run out of boost!!

Link to comment
https://www.sau.com.au/forums/topic/132706-lag/#findComment-2475346
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
    • Did you hit up the search function? R33 and greddy and cable returns this thread with some options.   https://www.sau.com.au/forums/topic/358214-rb25-throttle-body/
    • Thanks buddy.. the standard one needs to be about another inch or inch and a half longer. Thanks anyway
×
×
  • Create New...