Jump to content
SAU Community

Recommended Posts

Thanks again price works out to be a tad over 2500 delivered very resonable, I sent them an email and it comes with everything need to bolt onto the stock manifold and standard size dump pipe.

cheers

Edited by Munna1

Just remembered about a article I read once in a HPI mag about a GTS25T with a apexi turbo. Had a look before and found it, issue 31 yellow r33 on the front. Using this turbo with 1.3bar of boost 268rwkw was produced. Mods incuded all the usual stuff plus light head work and step 1 256 tomei pon cams, the NVCS disabled and cam gears were used instead

cheers

Im very interested to see how it will go mint, if I had the cash to upgrade my turbo I recon this is the one id get to. What other mods do you have / plan to have.

cheers

Currently have FMIC, full exhaust with hi flow cat, pod filter and power FC.

Will be adding poncams, fuel pump, injectors, Z32 AFM and apexi super suction (basically steel intake pipe) kit to the list before getting it all tuned along with power FC boost control kit.

Apexi rate the turbo at 375hp (from memory) or 280kw, but I will be happy with around 250kw.

That is the exact setup mod for mod that I was thinking mint, the same power target (250rwkw) too. Tomei poncams where my pick as you will be able to keep the NVCS for better midrange. If this setup makes the power it would make it the perfect street setup for a RB25 in my opinion.

My only concern is the amount of boost required to get to 250rwkw id estimate around 1.3 bar. A question for the experts, would we need a thicker head gasket to lower compression? Or will this boost and power level be fine with stock internals.

Hopefully you could get away with this without the thicker headgasget as response, spool time and off boost torque would be sacrificed.

Keep us posted mate

cheers

There is definitely some restriction somewhere as my car was making exactly the same power at 16psi as it was at 14psi..

I've heard of people comfortably running 18psi through these.. There's more to the turbo than my graph shows imo

  • 4 weeks later...
  • 1 month later...
That is the exact setup mod for mod that I was thinking mint, the same power target (250rwkw) too. Tomei poncams where my pick as you will be able to keep the NVCS for better midrange. If this setup makes the power it would make it the perfect street setup for a RB25 in my opinion.

My only concern is the amount of boost required to get to 250rwkw id estimate around 1.3 bar. A question for the experts, would we need a thicker head gasket to lower compression? Or will this boost and power level be fine with stock internals.

Hopefully you could get away with this without the thicker headgasget as response, spool time and off boost torque would be sacrificed.

I asked this question ages ago. Do you guys recon the standard compression on a RB25 will handle 1.3 bar/ 19psi or would a thicker head gasket be needed.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...