Jump to content
SAU Community

most rwkw with stock turbo & cooler???


Recommended Posts

I agree 105%.

Similar to the story of my small mods trying to max out my stock ECU + Turbo rather then just taking the easy step of whacking on a bigger turbo.

Maximise what you currently have until you can't get anything more out of it, -then- start modding.

Guest TUFR33
Originally posted by Steve .

Did you actually have a power figure in mind or are you just wondering what is possible?

Steve [/b][

/QUOTE] i was looking at the 200 mark, i would be happy with that,i have a dual stage turbo controller,so most of the time i run around at low boost!!!!!

TufR33,

Sorry for not answering the original q's. I get on my soap box a bit :(

A hiflow would be good, a modest sized intercooler upgrade (same flow as turbo spec). Fuel pump, reg and s-afc.

Nigasnt,

Ask yourself this (re: driverskill) : " how hard is it to drive in a straight line?". Not hard is it. :(

Don't go to a track day till you can or there will be trouble! :D

TufR33,

Sorry for not answering the original q's. I get on my soap box a bit :(

A hiflow would be good, a modest sized intercooler upgrade (same flow as turbo spec). Fuel pump, reg and s-afc.

Nigasnt,

Ask yourself this (re: driverskill) : " how hard is it to drive in a straight line?". Not hard is it. :(

Don't go to a track day till you can or there will be trouble! :D

TUFR33, think you will have trouble getting there with a stock coola. Turbo should be OK, as several people have had over 200rwkw with the stocky.

You should be just ok with the fuel system if it is healthy to begin with, but will be at its limits.

You most probably will need some sort of management, unless you have one of these freakish series II ECUs, but time will tell.

I have just over 200 on a dyno dynamics dyno (tilbrooks), with power fc, EBC, pod (with partition and CAI), full exhaust - heat wrapped dump, FMIC, Z32 afm and 0.85bar boost. My injectors are on their last legs, as I guess my fuel pump will be too.

Hope this gives you some sort of idea - but there is more than one way to skin a cat, (or should the experession be updated to gut a cat...:( ) and there will always be slight differences car to car.

Lastly, you will have to get a new clutch - best do this one early as it is a bit disappointing (personal experience:p ) when you mod then cant drive it properly, or tune it properly till you upgrade the clutch.

Just my 0.02 hope it helps

If you already have a mines chip, I wouldnt be expecting too much, but a SAFC2 definately wont hurt.

I believe some lads on here have quoted gains in the region of 10-20rwkw+, but I am not sure how much boost or with or without coola etc so I wont try and bullshit you - I really dont know.

Perhaps someone else might be better qualified to answer that one????

Originally posted by INASNT

rev

theres more involved in a 1/4 run that just driving in a straight line. U r just very moddest!

i so wanna see u run that time at calder, i dont think u can do it down here in melbourne

ha ha.. you are funny.:D

I would take you up on the challengen but, melborne is a fair way off.

Why don't you think I can do it, after all it's just a drag strip?

Its ON!

In the white corner...with 183rwkw and weighing in at a conservative :) u get the idea

Nothing wrong with a little friendly competition. Once I figure out the perfect launch and add a couple more mods then I will join in the fun. [that's a promise and a threat :)]

It is more fun, calder is good for a time slip etc but not as fun as what he said. I am always ready - u guys have a lot more mods though...but I dont care...

sorry - that was slightly off-topic!

just adding something more on-topic. mine has recorded 182rwkw with stock turbo and cooler ~ oh and just about stock everything else too :)

[only mods are pod filter, 2-3psi increase and cat-back]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...