Jump to content
SAU Community

Recommended Posts

My car wasn't optioned with the factory A-Pillar tweeters, but I have found some a-pillar tweeter trimmings and was wondering if I bought them and fitted them to my car if you could fit aftermarket tweeters (focals to be specific) in them?

here's come pics of the factory tweeter trimming:

post-11149-1157528268.jpgpost-11149-1157528311.jpg

Theres not as much room behind the A pillar trims as it looks so fitting aftermarket tweets may not fit too easily behind the factory grills. The factory optioned tweets are quite small.

Give it a measureup and see, some of the focal tweets are fairly small so you never know I suppose.

I looked into it when I was doing my install.. Not enough room.

And from memory, the little rectangle doesn't pop out, it's just a groove in the plastic if you didn't have the tweeter option. You probably would have to cut the holes out?

Stylish.. now THAT's doing it right!

If you can get your hands on the pillars, wouldn't they have the tweeters still attached?

Or is the quality of the optional tweeters lacking somewhat?

Naww bro! Get two a-pillar guage-holders, and then stick them in that. Then light them up with a bright blue light and write "NISMOHKSGREDDY" on them.

;op

=-]

Yep, but I was going to replace the whole panel with one that had the tweeter option :O

nice , neat and only you know what is under it :spank:

finding them could be fun though.

what about the tweeters on the r34 pillars? can they be replaced by aftermarket?

never tried. I think the one I have coming up on friday has them so I'll look.

If you have $600 focal speakers (very nice) you don't want to be mounting them in the A pillars as the positioning is extrememly poor sound wise.

I had a professional install done on mine with a pair of focal split's, and they mounted the tweeters at the back of the dash board (tilteded on an angle), paying great attention to the positioning and angle they mounted at.

If your spending the money of this sort of quality gear it;s really worth positioning the speakers correctly. Extremely happy with mine, they really look quite neet.

ahh thanks for the tip mate.

I have heard alot about tweeter positioning, if you ask FHRX he will suggest mounting them in the foot well, other people suggest near the windscreen, and others about a hand space from the midbass driver. I guess it all depends on personal taste. Chris Rogers will prob suggest another place again :dry:

Yeah mine are mounted near the windscreen.

Other thing is when your installing quality gear you really must sound deaden the front doors to get the most out of it. Really is amazing the difference it makes. As with everything it must be installed properly, if you can afford it Dynamat Xtreme is the best, but some of the others are OK.

Heaps of info on sound deadening in these forums.

  • 2 weeks later...

I have just fitted a set of pioneer splits to my front doors, I also was after the clean and tidy look so i sprayed the silver tweeter trimmings matt black. The combo of dynamat extreme on the inner and outer door sheetmetal and the positioning of the tweeter is great, the tweeters literally scream at you, not like some other tweeters ive seen where you struggle to hear them. Heres a pic of my door setup.

post-30339-1158882199.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...