Jump to content
SAU Community

Recommended Posts

My car wasn't optioned with the factory A-Pillar tweeters, but I have found some a-pillar tweeter trimmings and was wondering if I bought them and fitted them to my car if you could fit aftermarket tweeters (focals to be specific) in them?

here's come pics of the factory tweeter trimming:

post-11149-1157528268.jpgpost-11149-1157528311.jpg

Theres not as much room behind the A pillar trims as it looks so fitting aftermarket tweets may not fit too easily behind the factory grills. The factory optioned tweets are quite small.

Give it a measureup and see, some of the focal tweets are fairly small so you never know I suppose.

I looked into it when I was doing my install.. Not enough room.

And from memory, the little rectangle doesn't pop out, it's just a groove in the plastic if you didn't have the tweeter option. You probably would have to cut the holes out?

Stylish.. now THAT's doing it right!

If you can get your hands on the pillars, wouldn't they have the tweeters still attached?

Or is the quality of the optional tweeters lacking somewhat?

Naww bro! Get two a-pillar guage-holders, and then stick them in that. Then light them up with a bright blue light and write "NISMOHKSGREDDY" on them.

;op

=-]

Yep, but I was going to replace the whole panel with one that had the tweeter option :O

nice , neat and only you know what is under it :spank:

finding them could be fun though.

what about the tweeters on the r34 pillars? can they be replaced by aftermarket?

never tried. I think the one I have coming up on friday has them so I'll look.

If you have $600 focal speakers (very nice) you don't want to be mounting them in the A pillars as the positioning is extrememly poor sound wise.

I had a professional install done on mine with a pair of focal split's, and they mounted the tweeters at the back of the dash board (tilteded on an angle), paying great attention to the positioning and angle they mounted at.

If your spending the money of this sort of quality gear it;s really worth positioning the speakers correctly. Extremely happy with mine, they really look quite neet.

ahh thanks for the tip mate.

I have heard alot about tweeter positioning, if you ask FHRX he will suggest mounting them in the foot well, other people suggest near the windscreen, and others about a hand space from the midbass driver. I guess it all depends on personal taste. Chris Rogers will prob suggest another place again :dry:

Yeah mine are mounted near the windscreen.

Other thing is when your installing quality gear you really must sound deaden the front doors to get the most out of it. Really is amazing the difference it makes. As with everything it must be installed properly, if you can afford it Dynamat Xtreme is the best, but some of the others are OK.

Heaps of info on sound deadening in these forums.

  • 2 weeks later...

I have just fitted a set of pioneer splits to my front doors, I also was after the clean and tidy look so i sprayed the silver tweeter trimmings matt black. The combo of dynamat extreme on the inner and outer door sheetmetal and the positioning of the tweeter is great, the tweeters literally scream at you, not like some other tweeters ive seen where you struggle to hear them. Heres a pic of my door setup.

post-30339-1158882199.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I refer you to this thread on PF, by someone who knows what he's doing. Paints a good picture of the humble AD09.
    • Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 😛 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
×
×
  • Create New...