Jump to content
SAU Community

32 Gtr For Sale Melbourne

Sico04

By Sico04,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

Sico04 Enthusiast

Sico04

Posted
Posted

R32GTR $22,000 ono In Melbourne

phone 0401 974 224

Email [email protected]

I know its a bit steep for a GTR but Who really wants to give money away...........

GTR Details as follows:

Excedy extra Heavy duty cushion button clutch with 1000pound pressure plate

Trust s/steel front pipes, and hi-flow cat and Apexi power intake panel filter in stock air box all just under 5000km old.............

Custom adjustable cam gears by Ice performance Melbourne, new timing belt, service, at 7psi made 162.5kw at all 4 wheels "maztec"

running 14psi for the last 2000km car was dyno tuned with 215kw at wheels Nigel from ICE.....

All seals changed on injectors and cleaned 2000km ago.

GTR also has, 17X9 Work CR emotion rims front and back " Koni adjustable suspension all new springs and bushes in suspension.

Brembo breaks front and back from r33 GTR,

MOMO race Italy steering wheel, and HKS exhaust.

Stereo is Japanese so only picks up jap channels, but has Cd player and aux input for ipod.

All work shops have complemented me on how clean and smooth the GTR runs??..no problems with car, had diagnostic done at Nissan through a friend just to check the system all components are 100%.

Knock sensors changed 500km ago.......

002.jpg

003.jpg

Dsc00439.jpg

DSC00441.JPG

rearcorner.jpg

front.jpg

Link to comment
https://www.sau.com.au/forums/topic/133365-32-gtr-for-sale-melbourne/
Share on other sites
Sico04 Enthusiast

Sico04

Posted
  • Author
Posted

$21,500 ono

I really need to get rid of the GTR, due to the lack of space for tools, bikes...........etc

no offer that i see to be reasonable will be refused

Will make cheaper for no RWC or REG

  • 4 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By MBS206 · Posted

      Why are people so insistent on making dirty water?!
    • Dose Pipe Sutututu
      Duncan's V37.......race car?

      By Dose Pipe Sutututu · Posted

      Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...