Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Blitz Bov.... Tried for three months to get an adaptor plate to fit where the stock one was.... NO GOOD. No one had or could get one. So i had to get my mechanic to Fabricate it on to the pipe leading to the Throttle body. (under the pod). It cost a bit to do it, but it sound's great and looks nice.

I'd show a photo, but i dont have a digital camera.

Cheers

Loz

Link to comment
https://www.sau.com.au/forums/topic/13401-blow-off-valves/#findComment-261222
Share on other sites

Well, thought i might of had some boost loss (i got worried when people spoke of "boost leak") But after some under bonnet testing (rev hard and watch valve) i noticed the "button" (copper release thingy) moved down furhter on rev..to seal the BOV . So i took it out for a hammer (foot to the floor) and it all seems fine.!!

Next is the Boost Guage.

and maybe the "Skyline" logo lit up in Blue....

Loz

Link to comment
https://www.sau.com.au/forums/topic/13401-blow-off-valves/#findComment-261291
Share on other sites

Originally posted by Lozza150

Blitz Bov.... Tried for three months to get an adaptor plate to fit where the stock one was.... NO GOOD.  No one had or could get one.  So i had to get my mechanic to Fabricate it on to the pipe leading to the Throttle body.  (under the pod).  It cost a bit to do it, but it sound's great and looks nice.

I'd show a photo, but i dont have a digital camera.

Cheers

Loz

I haven’t been able to find a adaptor for the Blitz my self do they actually make them?

I think I'll go for a GFB or Turbosmart pop off valve:)

Link to comment
https://www.sau.com.au/forums/topic/13401-blow-off-valves/#findComment-261367
Share on other sites

I used a Trust Type R BOV on my GTST. The BOV kit itself doesnt inlcude the adapter however Advan at Silverwater sell the adpater plates for GTS-T so they bolt straight on.

After using a Turbosmart and an HKS SSQV BOV I found the Trust to be a better unit and experienced less idle/stall problems.

Link to comment
https://www.sau.com.au/forums/topic/13401-blow-off-valves/#findComment-262699
Share on other sites

holy cow lozza...im not sure if all those series of blitz bovs are the same or not...i've got the same one..and from the look of ur pic..ur one is really really loose...are you sure its not leaking at idle?

unless ur screw has been changed....cause my one you can see about 3 threads after the nut which is about just right...

do u have probs with rev's when coming to a stop after hard run?

Link to comment
https://www.sau.com.au/forums/topic/13401-blow-off-valves/#findComment-263342
Share on other sites

The Mechanic's adjusted it to suit with the standard BOV unit connected as well. After disconnected the stock one and now just running the Blitz one... It's a lot louder.... but "seems" ok. After a good run, it does drop the rev's very low...for a split second, then it must seal and all is ok. It's hard to tell if the unit is not leaking... Logic tells me if it was leaking, I'd lose boost pressure on the guage... but it still show's the same ..7PSI... (yes stock i know..) So i guess I'm not.

As posted earlier doing a rough run in in the garage showed the brass thingy to push down further during boost pressure....(vacume change i guess)

Eventually when i get an exhaust and stuff fitted ill get a dyno tune, and they can check all that for me...

Cheers

Loz

Link to comment
https://www.sau.com.au/forums/topic/13401-blow-off-valves/#findComment-263371
Share on other sites

  • 2 weeks later...
Guest SXU29T

ive had three blow of valves in my s15 since i bought it blitz super sonic s1, then a apexi dual chamber and how a blitz super sonic s2 i found that even though the s1 blitz was 2nd hand from japan of a s13 silvia their was no idleing probs or boost leak and had and awsome bark goes to show theirs nothing like japanese engineering!!! i have a friend who had a brand new gfb bov installed in his skyline it shit itself after bought 13000k's the piston jus kept seizin?//// then swapped my blitz s1 for the apexi dual chamber it was good but didnt really find its sound loud enough(riceboy) and it was a big& bulky mfuca in my engine bay, now i have a blitz s2 its awsome has a diff sound to s1 not as loud but fluters a high boost cause of the fluted design of the outlet. i can give u a contact of some one that can get u a genuine blitz mounting adapter for skylines for bout 30-40 bucks but his in sydney? and its 2nd hand?

Link to comment
https://www.sau.com.au/forums/topic/13401-blow-off-valves/#findComment-289894
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...