Jump to content
SAU Community

Recommended Posts

Hi all.

So i know what each is, but how do i dignose it. I keep thinking i keep on hearing things in my R33.

How does one tell if the engine is knocking or pinging. I have fitted an SAFC II and i hardly get any knock maybe up to 15 or so. The car pulls HARD and EAVEN all the time, but somethimes i swear to god i am hearing something like knocking or pinging, but the car does not stumble or anything, no missing, no smike nothing. ( hard to tell with 3.5' exhaust and HKS pod)

So how does one tell by ear if anything is happening. What noises can you tell from, and symptoms.

ALSO how do i check timming, i have a series 1.5 so a series 2 ignitor on coil, no idea how to connect things up.

What are the timing setting suppose to be at idel ect????

HELP ME FROM GOING INSANE

Edited by WogsRus
Link to comment
https://www.sau.com.au/forums/topic/134153-knocking-and-pinging/
Share on other sites

Knocking and pinging is generally caused by improper combustion in your engine, called "auto-ignition."

An internal combustion engine runs properly when the spark-initiated combustion wave expands rapidly but smoothly across the combustion chamber.

If the gasoline-air mixture auto-ignites somewhere in the cylinder (other than at the spark plug) just after spark ignition, the auto-ignition combustion wave can interact with the spark-initiated combustion wave, causing the vibration we hear as a knock or ping.

Increasing engine load, temperature, compression, spark-advance, air-fuel ratio, combustion chamber deposits, and decreasing altitude all increase the tendency for an engine to knock. :(

if your car is pinging/knocking its not good. Its something you should get checked out man. the human ear cannot hear about the first 10% of the sound that is made so if you can hear it over the exhaust pod than its pretty bad. If you got a Power FC I think there's a function where you can make it flash the engine light when its pinging/knocking???? Good luck man.

well the car is runnign stock boost and intercooler but new pod and exhaust, i am not saying my car does knock or ping, i simply WANT TO KNOW what they sound like and how to pick it ip if it does do it.

SO SOMONE tell me please.

I know what they are and what happens to the engine when it goes wrong, but HOW do it pick it up by ear.

THANKS.

BTW My safc II has a knock setting, it never goes higher then 15 or so.

Edited by WogsRus

If u can hear it pinging will sound like a box of matches ratling in the background very faint, then sever knocking is basically that, like a cylinder went knock on the side, well thats my interpretation. I drove around for 2 days wihtthe pining box of matches sound and it was real quiet so i thought it wasnt to big a deal to be urgent and then i busted a piston. ended up buying a new engine. Get it checked if your in doubt by a good workshop.

Thats my point, i have a 3.5" ehayst and a HKS pod with bellmoth intake, and at 4000rpm, no idea what is what, everything makes noise.

I have a timing light now and will check the timing this weekend.

Will pinging be notice by performance, ie losst or a miss or something

Listen to a loaded up mitsubishi express van go past in a gear too low for it. That's pinging. It's a metallic kind of rattling. I can hear it in my car but my exhaust isn't that loud and I don't have a pod. It's easier to hear with the windows up.

It's the kind of sound that someone needs to point out to you. Once you know it you know it. Hard to describe otherwise.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
    • Yes they do. For some maybe. But for those used the most by abusers, ie Skylines, the numbers are known. The stock eyebrow height for R32/3 Skylines is about 365/375mm or thereabouts. The minimum such heights are recorded in adjacent columns in the database.
    • Hmmm, interesting. Makes me wonder whether there is bias as well. It's the cheapest fuel, so it is used for all kinds of ill-maintained shitboxes which are bound to have issues regardless. Nicer cars tend to require higher octane rated fuel and can't use it anyway. FWIW, the official NSW E10 facts page is decent. 
×
×
  • Create New...