Jump to content
SAU Community

Recommended Posts

Hi all.

So i know what each is, but how do i dignose it. I keep thinking i keep on hearing things in my R33.

How does one tell if the engine is knocking or pinging. I have fitted an SAFC II and i hardly get any knock maybe up to 15 or so. The car pulls HARD and EAVEN all the time, but somethimes i swear to god i am hearing something like knocking or pinging, but the car does not stumble or anything, no missing, no smike nothing. ( hard to tell with 3.5' exhaust and HKS pod)

So how does one tell by ear if anything is happening. What noises can you tell from, and symptoms.

ALSO how do i check timming, i have a series 1.5 so a series 2 ignitor on coil, no idea how to connect things up.

What are the timing setting suppose to be at idel ect????

HELP ME FROM GOING INSANE

Edited by WogsRus
Link to comment
https://www.sau.com.au/forums/topic/134153-knocking-and-pinging/
Share on other sites

Knocking and pinging is generally caused by improper combustion in your engine, called "auto-ignition."

An internal combustion engine runs properly when the spark-initiated combustion wave expands rapidly but smoothly across the combustion chamber.

If the gasoline-air mixture auto-ignites somewhere in the cylinder (other than at the spark plug) just after spark ignition, the auto-ignition combustion wave can interact with the spark-initiated combustion wave, causing the vibration we hear as a knock or ping.

Increasing engine load, temperature, compression, spark-advance, air-fuel ratio, combustion chamber deposits, and decreasing altitude all increase the tendency for an engine to knock. :(

if your car is pinging/knocking its not good. Its something you should get checked out man. the human ear cannot hear about the first 10% of the sound that is made so if you can hear it over the exhaust pod than its pretty bad. If you got a Power FC I think there's a function where you can make it flash the engine light when its pinging/knocking???? Good luck man.

well the car is runnign stock boost and intercooler but new pod and exhaust, i am not saying my car does knock or ping, i simply WANT TO KNOW what they sound like and how to pick it ip if it does do it.

SO SOMONE tell me please.

I know what they are and what happens to the engine when it goes wrong, but HOW do it pick it up by ear.

THANKS.

BTW My safc II has a knock setting, it never goes higher then 15 or so.

Edited by WogsRus

If u can hear it pinging will sound like a box of matches ratling in the background very faint, then sever knocking is basically that, like a cylinder went knock on the side, well thats my interpretation. I drove around for 2 days wihtthe pining box of matches sound and it was real quiet so i thought it wasnt to big a deal to be urgent and then i busted a piston. ended up buying a new engine. Get it checked if your in doubt by a good workshop.

Thats my point, i have a 3.5" ehayst and a HKS pod with bellmoth intake, and at 4000rpm, no idea what is what, everything makes noise.

I have a timing light now and will check the timing this weekend.

Will pinging be notice by performance, ie losst or a miss or something

Listen to a loaded up mitsubishi express van go past in a gear too low for it. That's pinging. It's a metallic kind of rattling. I can hear it in my car but my exhaust isn't that loud and I don't have a pod. It's easier to hear with the windows up.

It's the kind of sound that someone needs to point out to you. Once you know it you know it. Hard to describe otherwise.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...