Jump to content
SAU Community

Recommended Posts

Hi guys,

I know it's not a big thing, but im pretty novice when it comes to cars and don't want to pay a mechanic to 'change a bulb'. Just wondering if it's as easy as it sounds to remove/replace headlight bulbs in an R32 GTST?

Seems one of mine is dead, so have decided to replace both. I have been told you can remove just the bulb itself, not the whole headlight enclosure, and that it should just 'pop out'.

Anyone that can help, or direct me briefly on how to go about this would be excellent!

Cheers fellas.

EDIT: Does anyone also know what kind of bulbs are used? If so, where to get some? Or more powerful ones?

Edited by RetardedMonkey
Link to comment
https://www.sau.com.au/forums/topic/134525-headlight-bulb-change/
Share on other sites

You can get at the bulbs from behind the head light. Trouble is that the battery and stock air box can get in the way. There is a screw on large circular piece that is removed by hand, remove the plug and then a wire circlip that holds the bulb in the light assembly.

For r32gtst's you can get either H1 or H3 bulbs so you are better off removing the dead one and taking it with you to a parts shop. The cars with H1's have the bulb mounted in a carrier that you also need to reuse.

They are common enough bulbs, any parts place will have stock. Just don't get Narva or you'll be changing them again in a year.

If you want more power you can get an aftermarket xenon kit, but its not exactly cheap.

If you have H3C bulbs, follow this guide so you can use the more popular H3 model (which you can get Plus 50's in, etc):

http://www.aus300zx.com/tech/lowbeam/lowbeam.htm

There's nothing available in H3C, they suck.

There's nothing available in H3C, they suck.

buzzz....wrong.

Ive found a bloke here in Adelaide who can sell me pairs of hc3 for around $25 a pair :(

Unfortunatly he is in the US atm, and wont be back till mid Nov.

Edited by Bl4cK32

what I meant was you can only get shitty generic H3C globes. Also I found some riceboy blue ones that were absolutely abysmal in light output.

Anything worthwhile, like Plus 50's that give you more light on the road where you need it, are only available in H3.

Hence my comment about H3C globes fellating the big one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was 99% sure the standard one is long enough to get there, you might just have to change the throttle orientation. If not, I remember someone having used an r31 cable instead, but that is probably harder to find than r33 by now...
    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
×
×
  • Create New...