Jump to content
SAU Community

Recommended Posts

well you can get pretty much anything landed in Aus for 10k, but when I did this I found I spent 10k on the car and 20k on the prep not the other way around.

consider cost of

cage

suspension (whatever it has will be too tired)

saftey stuff - extinguishers, tow hooks, kill switches, fuel pump cut, window nets, tailshaft loop

seats & harnesses

wheels and tyres

all new bushes, let alone rose joints or adjustable arms

guages

ecu and tuning

new pads and discs, overhaul calipers.

reco all CV joints (4 on a gtr), tie rod ends, 4x wheel bearings, tail shaft unijoint.

reco starter and alternator

replace all hoses and belts......over 30 hoses on a gtr

all new fluids - coolant, engine oil, gearbox oil, diff oil (x2 gtr), transfer case, attesa fluid, power steer fluid, brake fluid

replacing anything else that is worn out or broken

and hopefully the motor and compression is OK.

only after all that would you have a safe starting point to make something go faster....

I know that I could do the other war around, but I was hoping for a early 1990's GT car that has already had a lot of money spent on cages, seats, gauges, suspension and the rest of it.

My understanding it the cage will be compliant as they follow FIA regulations, so it should have a FIA approval, as will the seats and harnesses.

It may be a pie in the sky idea that I can get a fully setup car, but from the prices I see for import drag/drift prepped cars, I think there would be pleanty of tarmac cars waiting for a good home.

Rather then look at buying out of Japan, you shoudl also consider buying a prepared car out of Europe. Some good buys going around. Right now im tossing up a track only GTSt, what will stop me is my trip OS and the procurement of one of these

cb_1.JPG

:):P;):D

My budget is $20k for a full race spec car. I do not think I am unrealistic in my expectations. I think that a race prepped RWD car from japan could easily be aquired for that money. I have a further $10k to spend on spares and anything that needs fixing.

I have also seen EVO6's going in race trim (rally) for $20k FOB.

Seriously on that budget go buy a 125cc Kart and have some fast fun...I have brought in plenty of race car s from Japan and there is lots to be spent when all is fixed and made safe....i think you may be disappointed with what you end up with on a 20k budget....my current club sprint GTR which was 800000 Yen and loaded with all sorts of goodies now owes me over 50k after 2 years of development/tuning/extra safety gear/slicks etc

I tried a 250cc international superKart, but it was too hard on my back, but the most fun I have ever had on a track. I would prefer to have pannels and a roll cage around me when doing high speed.

I understand that there will need to be money spent, I own a business that will be sponsoring it. I am realistic about costs of owning a car, as I have owned 2 sports sedans many years ago.

I do not see why I cannot pickup a fully race RWD car from japan for my budget that will be fine for club work. I do not intend to do any national series, only private days and supersprints.

Does anyone have any websites that advertise these types of cars ?

Edited by 4DoorGTR
Rather then look at buying out of Japan, you shoudl also consider buying a prepared car out of Europe. Some good buys going around. Right now im tossing up a track only GTSt, what will stop me is my trip OS and the procurement of one of these

cb_1.JPG

:);) ;) :)

Wanna bring me one back too Troy?? :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It could be in the tune but in both cases it couldn't be completely solved or eliminated by some of the best tuners in victoria so I'm DOUBTFUL that it's in the tune or ECU but stranger things have happened of course. I've pondered that theory too but is there any theories that thinner and smaller ports overall would cause a turbo to spike? I would've thought it would just restrict it in general if it was small enough to make a difference. I wouldn't expect it to make a different at what is essentially sub 300kw at 4000rpm anyway. I think the next step is going to have to be the 6psi spring to rule out the idea that the gate is cracking open far too wide initially. At least that is the cheapest (free) thing to check initially.
    • I'm thinking it is skinny NA Neo port sizing and cams. Somehow.
    • -5’s did it. 8474 did it. Not hot side related. ECU related? 🤨🤪
    • Above you mentioned you only need to sand primer if there's an issue with it but with fillers it says the surface needs to be sanded to X grit beforehand. Does that sorta contradict that point as the primer hasn't been sanded yet? At the same time if I sand the primer, there's a good chance I'll expose the bare metal and I'm just chasing my tail at that point. Or I'll just use a sand sponge instead of sandpaper, it seems to be far finer in terms of abrasiveness as opposed to sandpaper. From what I understand, filler is like primer and needs scratches from the sandpaper to help it adhere to the panel. I realised the way I'm doing things is actually a bit counter productive as there's a chance after I put filler I will need to put epoxy primer again as opposed to putting the filler first and potentially no primer if I don't go to bare metal. Will keep this in my mind for the rest of my repairs.
    • Not without making up a new screamer pipe from scatch I don't think based upon the angles of the current return. Backpressure shouldn't be an issue though as the straight gate isn't affected by backpressure in the same way that a poppet valve is, and on top of that the exhast system is 4" all the way through so there should be minimal pressure if any to begin with.
×
×
  • Create New...