Jump to content
SAU Community

RPM Performance - Sat' 31st May Drag Day - post here if intending to enter


Recommended Posts

As the thread says - If you're keen, post below.

DATE - Saturday 31st May

TIME - Start: 10am Finish: 5pm

ENTRY FEE - $85

Entry fee is to be paid by dropping in to RPM Performance Centre -26 Deloraine Road Edwardstown 5039. Ivan has entry forms to be filled in there & then. Payment needs to be made 1WK prior to the event date.

*IMPORTANT! Check here for full up to date details* -

http://www.skylinesaustralia.com/forums/sh...25&pagenumber=2

Limited entries (aiming for 50) so get in quick! - First in best dressed. Entries above 50 will be reserves in case we have people dropping out. I would almost guarantee some of the people below will not be able to make it so keep those entries coming people!

CURRENT ENTRY LIST: Current PAID total - 36

(If you don't wish, or are unable, to attend let me know & I will remove you from the list)

Ivan - Proton Satria GTi (4G63 turbo transplant) PAID

MattR - GTS-t PAID

CheekyR32 -GTS-t

EnricoPalazzo - GTS25t

skipppy - GTS25t PAID

Munro - various (all fast ones)

Miss_Nismo - GTS-t/Pulsar (maybe)

Rob - GTS25t

Redline - VY SS PAID

BRUTE - VU SS PAID

SydSS - VT SS PAID

Martin Donnon - 2.5T Soarer & XR6T Ute

Clint32 - GTS-t PAID

grepin - GTS25t PAID

Maxx - GTS25t PAID

Chris32 - GTS-tPAID

32godzilla - R32 GT-R PAID

SR910 - Bluebird (SR20DET) maybe?

Freebaggin - GTS25t PAID

BLO-305 - VX GTS

TIMMMAYYY- R31 Silhouette PAID

SVE - ?

Ben - Supra MK3 (1JZGTE) PAID

Mark - 180SX (RB20DET) PAID

Ray - GSR

Anthony - GSR PAID

Mark - Peugeot (turbo conversion)

Tong - VL Walkinshaw (2JZGTE - yep!) PAID

Daniel - ET Pulsar turbo

NewHotness - VX SS PAID

rob vu ss ute - Monaro CV8 PAID

Bugalugs - GTS25t

tN^ - Cefiro

Jim - Evo 3 PAID

Leon - GSR

Josh - Lancer VR4

Ben - Lancer EVO6 Tommy Mackinen PAID

Adrian - VR4

Mark Philips - GSXR 750 PAID

Dave - VT SS PAID (not sure if Dave is already above?)

Alan - Toyota Soarer PAID

Bill - GSR PAID

HRT Stroker PAID

Chris - Hyundai Excel PAID

Bill - Mitsubishi Lancer PAID

Alexis Paul Poole - Honda CRX PAID

Ben Siedel - RX3 RPM car PAID

Keir Wilson - R32 GT-R PAID :(

Mark - Commodore PAID

Greg - Monaro PAID

Brad - HZ Premier PAID

Adam - 180SX PAID

Jeff - Ford Escort PAID

  • Replies 111
  • Created
  • Last Reply

Top Posters In This Topic

Matt,

Sorry about yer run last night buddy, you'll get 'em next time.

Anyways, I have put up a post on the LS1 forum to gain interest for this meet, from people that i have spoken to the general consensus is "BRING IT ON"...

Cheers

Mat

I should be in pending on date obviously : )

Off topic, what do u guys launch at. I was trying a few launches tonight with my mate and best i could get between 6.2-6.5 0-100

I can feel that there is alot of improvement there so hopefully i will dip into the 5's.

Bear in mind it was with a stop watch and ive only had the car on the road for 3 days : )

Good stuff people - glad to see you're all keen :P After the 05Apr street meet it easy to see why!

Matt,

Thanks mate - for both the assistance on the AIR day & the kind words after my sad effort at the street meet :P

Clint,

The shift light is a unit made by Pivot (Jap brand name) See here - 1000500591hi.jpg & here - http://www.autospeed.com/shop/category_176...761/browse.html

It's designed as a cigarette lighter plug-in but I cut the plug off & hard wired it in. Works well, especially when you hit the limiter under w/spin! Oh yeah, it's red in the pic/ad but mine came with a blue lens!

I've seen you take off before - you'll put some of the guys to shame.Once you have 1 run under your belt you will be loving it - trust me. (BTW - sorry about the 3am SMS - I pressed the wrong key)

Erica,

More likely to be 50 (or even less) people private. I was chatting to Ivan again earlier today & he didn't make any mention of advertising beyond our forum groups + a few of his regular customers.

Good onya' Chris. That's the spirit :D

Good to see you made it to the forums 32godzilla! (Bit of SAUSA advertising at the drags never goes astray!) Very nice times too! You'll have to come out cruising ....

32godzilla - was that you I ran against in the bracket when I did the 9.50? Was sitting on the start line waiting,waiting for my green light & loved reeling in another set of stovetop lights.

Was looking at the datalogging tonight & even though the trap speed was 153mph(245km) I didnt back off till at least 265 in 6th gear well after the line!!!

After reading Martins comment on page 93 of HPI.29 I couldn't believe it when a "$50,000 torana" lined up next to me on the next run.Even though the GTR was all over the place I couldn't back off & let him go, so I fought the steering in every gear & took him at the line.I'm not sure if there was more than a metre

between our door handles over the line & I know which car would be more fun to drive.

G'day & welcome 32godzilla,

Does a certain Yamaha bike have anything to do with your car ;) ? If so then I was just behind & to the left of you in the line up lanes Sat night - nice 32R mate :) Nice time too! Hey can I borrow your traction advantage :P

Likewise SR910,

Yep mate it's on a weekend. So your in :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...