Jump to content
SAU Community

Exhaust For R33 96 Sii

Nismo_God

By Nismo_God,
in Engines & Forced Induction

 Share

Recommended Posts

Nismo_God Veteran

Nismo_God

Posted
Posted

Hi All,

Just wondering what u guys think of the quote and if there are any places around that could possilby do a better price. Also wondering what kind of improvements are noticed with a decent exhaust. Thanks

A split dump pipe is $600 fitted

A 5" ballistic cat with 3" pipe size is $500 fitted

A 3" system is $580 fitted + tip.

Link to comment
https://www.sau.com.au/forums/topic/135043-exhaust-for-r33-96-sii/
Share on other sites
mad082 Grand Master

mad082

Posted
Posted

sounds a bit much to me. sure it may be worth it for the stuff they are using (possibly) but there are systems out there much cheaper. full x-force turbo back 3" in stainless stell for $970 from UAS. that doesn't include fitting, but you could do it yourself. would take about half an hour.

shorty_01 Proficient

shorty_01

Posted
Posted (edited)

Hey mate,

Try x-force 3 inch turbo back exhuast. U can get for 800 (mild steel) or so. Good performance at good price. check it out at www.Justjap.com

Just search x-force n you'll see comments from other sau memebers who have purchased this product.

Edited by shorty_01
NicsR33 Experienced

NicsR33

Posted
Posted
i run the mild steel 3.5" cat back system, with 3" x-force cat, ebay dump, and some front pipe that was already on the car. very happy with it.

hey sorry to go off topic here but im getting the same setup installed tomorrow, is the 3.5" loud? kinda worried about that they had no 3" avialable hehe.

as for the main topic, the prices sound really steep. shop around and like others have said eBay is your friend! good stuff off there. Just Jap do 3.5" mild steel turbo back exhaust minus the canon for $599. then just get a twin pipe muffler off ebay for $100 and ur set.

subzeroR33 Mentor

subzeroR33

Posted
Posted (edited)

Not sure about the dump pipe, but the rest sounds like the going rate for a custom exhaust. Good choice with the 3" pipe any bigger you start to get lag, even a 4" inch cat will do the job might be cheaper than the 5".

Check out C.E.S exhaust just type it in google, they have the best dump pipes for skylines.

If you are running a stock exhaust, you will hear and feel the difference you will like it.

Edited by subzeroR33
mad082 Grand Master

mad082

Posted
Posted

how does adding a bigger exhaust create lag?

i don't find the exhaust too loud. the rear muffler is only 3", but i have a mate with the full x-force turbo back (3" front, dump and cat, then 3.5" cat back) and it isn't really any louder. it sounds sweet at full noise. burbles a little on deceleration though.

subzeroR33 Mentor

subzeroR33

Posted
Posted
how does adding a bigger exhaust create lag?

i don't find the exhaust too loud. the rear muffler is only 3", but i have a mate with the full x-force turbo back (3" front, dump and cat, then 3.5" cat back) and it isn't really any louder. it sounds sweet at full noise. burbles a little on deceleration though.

Im not an expert but i think it has to do with back pressure so i was told, from experience with my car i had a 3.5" exhaust with a 5" tip hks cannon, the car makes 330 rwkw and it did have lag. The turbo didnt cut in til 4000rpm.

Changed it to a 3" pipe and smaller cannon, it feels more responsive quieter and the turbo cuts in at 3500rpm.

otto Collaborator

otto

Posted
Posted
how does adding a bigger exhaust create lag?

i don't find the exhaust too loud. the rear muffler is only 3", but i have a mate with the full x-force turbo back (3" front, dump and cat, then 3.5" cat back) and it isn't really any louder. it sounds sweet at full noise. burbles a little on deceleration though.

madd why does your exaust change size 3 times from turbo to tip i would have thaught keeping things the one size all the way through would be best

rb26s13 Mentor

rb26s13

Posted
Posted
Not sure about the dump pipe, but the rest sounds like the going rate for a custom exhaust. Good choice with the 3" pipe any bigger you start to get lag, even a 4" inch cat will do the job might be cheaper than the 5".

Check out C.E.S exhaust just type it in google, they have the best dump pipes for skylines.

If you are running a stock exhaust, you will hear and feel the difference you will like it.

Im not an expert but i think it has to do with back pressure so i was told, from experience with my car i had a 3.5" exhaust with a 5" tip hks cannon, the car makes 330 rwkw and it did have lag. The turbo didnt cut in til 4000rpm.

Changed it to a 3" pipe and smaller cannon, it feels more responsive quieter and the turbo cuts in at 3500rpm.

it may creat a little dead spot running a bigger exhaust but it till make more power everywere even tho you can feel a little delay stomping it with the stock turbo from low revs.. a smaller exhaust may creat back pressure and spool up quicker how ever it will be making far less power.. for instance a mates r32 was seeing 14psi by 2400rpm only made 126rwkw!!! with the stock turbo and a FULL 3inch turbo back exhaust (cat converter had fused together)

after we replaced the cat with a brand newy the car felt completely different to drive in every way.. havent put it back on the dyno yet but am looking at doin that sometime next week..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...