Jump to content
SAU Community

Recommended Posts

Originally posted by hungry6

by far the best of all the aftermarket japanese computer i've used including power fc!!!!

I'm no expert on ecu's, but wouldn't the power fc be better, just for the fact that its adjustable.

also i've heard that with the mines ecu it can be sent back to mines if you change your mods and they ajust it accordingly, is this true??

Link to comment
https://www.sau.com.au/forums/topic/13524-mines-computer/#findComment-264380
Share on other sites

there are no tuners in Aus that can use/adjust the MINES ecu's and therefore if you make a mod, then the ecu must be sent back to MINES JAPAN and they will reprogram it and include the mod you have made.. but just say that you got a nw intercooler from Mick Metalcraft or some other Aussie brand not known over there..

they can't adjust it for that because when they make adjustments, it's like ticking off a shopping list.. eg.. new upgrade to intercooler - HKS, tick..

so I don't know how usefull these are here in aus if you are going to make other mods then what you already have..

Link to comment
https://www.sau.com.au/forums/topic/13524-mines-computer/#findComment-265663
Share on other sites

yeah, like everybody else says.. .mines is pretty specialised - it is fine for japan.. but its like the whole ECU has to be reprogrammed to exact specs using Mines equipment.

I'd go for a more local-friendly ECU.. powerFC, wolf3d, microtech, motech, and probably a couple of others.

Link to comment
https://www.sau.com.au/forums/topic/13524-mines-computer/#findComment-266475
Share on other sites

  • 5 years later...
yeah, like everybody else says.. .mines is pretty specialised - it is fine for japan.. but its like the whole ECU has to be reprogrammed to exact specs using Mines equipment.

I'd go for a more local-friendly ECU.. powerFC, wolf3d, microtech, motech, and probably a couple of others.

Im about to buy R34 GTT and the one Im looking has Mine's ECU. I wonder if that will be any good for performance and reliability or just a headache since tuner will tell me that he s got no idea how to adjust or even check the ECU because its something they r not used to...

So Im afraid of getting the car with Mines ECU and getting ripped off. In case it malfuncitoins and not working what do I do? Worries worries because I have "no idea about Mines ECU"

Link to comment
https://www.sau.com.au/forums/topic/13524-mines-computer/#findComment-3814784
Share on other sites

Im about to buy R34 GTT and the one Im looking has Mine's ECU. I wonder if that will be any good for performance and reliability or just a headache since tuner will tell me that he s got no idea how to adjust or even check the ECU because its something they r not used to...

So Im afraid of getting the car with Mines ECU and getting ripped off. In case it malfuncitoins and not working what do I do? Worries worries because I have "no idea about Mines ECU"

Buy a factory ECU then piggy back it. Negotiate price to free up cash to include this stuff. :)

Link to comment
https://www.sau.com.au/forums/topic/13524-mines-computer/#findComment-3814798
Share on other sites

I have a Mines Tuned ECU in my R32 GTR. I only have a cat back exhaust, the rest of my car is standard (boost, turbos, etc....). In terms of reliability my car is perfectly reliable for the australia climate, RON of fuel (I use BP98). Cold starts are perfect, etc......

I aggree though with some of the guys here that if you want to start modding your car then you would need to look at a aftermarket ECU (pref aussie made one e.g. haltech) as there is local support and servicing). If you are going to leave it stock then enjoy the car as it is!!

my 2 cents......

Link to comment
https://www.sau.com.au/forums/topic/13524-mines-computer/#findComment-3814919
Share on other sites

I also have one in the R32 GTR.

A bit rich, pops flames and all that jazz.

Car has run up to 1.1bar on stock turbo fine. Very cold night though.

Doesn't like certain fuels. The car runs a bit more sluggish if not on BP Ultimate.

I'm going to guess these things were tuned to run 100ron fuel. As there is a big sticker on the inside of my fuel flap with some japanese writing and "100ron!!!!" on it.

Link to comment
https://www.sau.com.au/forums/topic/13524-mines-computer/#findComment-3814943
Share on other sites

Hi guys, My friend has just found out he has a Mines computer in his Z32 300zxtt.

What exactly do they do?

I understand that it is a remapped computer, but how much gain can we expect over standard?

probably about 20kw and a broken ring land!!!

They are no doubt alright on Jap fuel but they are no good on Aussie fuel. There is no such thing as being able to send the ECU back to Japan and have them modify the tune successfully!!! Every car is different and if they werent why would we need to create individual tunes for cars that have the same mods!!!

Get rid of it and buy a Power FC!!! your pistons and rings will be eternally grateful!!!!

Link to comment
https://www.sau.com.au/forums/topic/13524-mines-computer/#findComment-3814970
Share on other sites

  • 3 months later...

Sorry to bring up an old thread but i have to ask..

I just recently went to install a safc and found that i have a mines ecu.

Now before i start solderin away, will the safc still work fine with a mines ecu?

I cant think of a reason it wouldn't but can you guys?

cheers,

-Trav

Link to comment
https://www.sau.com.au/forums/topic/13524-mines-computer/#findComment-4043224
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...