Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

when are you going to japan toshi? I'll be over there in a few weeks time. going to spend a week or so in tokyo, then a week or so in osaka/kyoto and a few days on kyushu (fvkuoka)

when are you going to japan toshi? I'll be over there in a few weeks time. going to spend a week or so in tokyo, then a week or so in osaka/kyoto and a few days on kyushu (fvkuoka)

Leaving on the 6th of October and coming home on the 16th. I was going to go to the Super GT Round at Autopolis on the 15th but it's too hard to get transport there from my grand mothers place.

Thanks Jess... should be good.

I'm maily going to see my family but I'll also be going to visit HPI and SUNLINE RACING

Oh wow lucky you!!!

Leaving on the 6th of October and coming home on the 16th. I was going to go to the Super GT Round at Autopolis on the 15th but it's too hard to get transport there from my grand mothers place.

Oh so going very soon!

DUDE!! you lucky bastardo. you will be in japan for the Japan F1 GP. You HAVE to go. it's on the 8/10.

I'm going to go to the final Super GT round at Fuji Speedway on 5/11. Should be awesome.

ooh. sunline should be sweet. I know nick is deeply in love with their wide body R34 GTR they had at this years TAS. They were quite friendly guys too. I spoke to a few of them for a little while. I LOOOVE their red R32 GTST. mmm it's what I have always thought I would do for a track GTST. SR22DET power. man it would be a sweet track beast.

from memory they are down kansai area? or even further south?

Can't do the F1, I'll be with my cousins in Nagoya that day.

Sunline are in Okayama which is perfect because that's where I get off the Shinkansen to get to my grandma's place. So a visit to Sunline before I get the train south will be nice :laugh: I really want to see their circuit spec S15 ;)

dude, you have to grab your cousin and get yourself to the F1. man, schueys last ever Japan F1 race, plus the championship is so close.

ok, now i know where they are, kind of southward. make sure you grab me some pics of their 32 GTST.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
×
×
  • Create New...