Jump to content
SAU Community

Recommended Posts

Hi,

I am currently driving a 1998 Nissan Skyline R34 25GT in a Semi-Automatic. It should run around the 150kw mark and all I have is a K&N air filter. I am also currently on my red P's, first year which means that I can't have any modifications done to my car - not that I'm gonna follow.

Anyways, what mods can I install to boost up my car - which is also not too obvious to the boys in blue

Cheers.

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

id be interested in this as ill be in your exact situation very soon, im geting my license back after a speeing offense, so ye im on my red ps, im gonna buy a semi auto r34gt, ive got a mate who does performance nissan gearbox's, but im not sure if this would do much to a standard 25gt?.. anyways, how is the car? do they have enough power for every day use and a lil bit for sum added fun every so often ??

You can get a shift kit to make it a bit less sloppy on gear-change.

Decent exhaust, porting and cams...maybe something like the new e-manage ultimate to trim the fuel and increase timing and raise the rev limit.

hey 666dan wat do u reccon all that would cost champ? do you think a shift kit would make a noticeable difference to the standard tip tronic, and with all this any chance of keeping up with our turbo buddys?

The shift kit would definately help, used to have a 25GT and would have liked crisper shifts in it.

I'd say for cams, porting, e-manage + tune you'd be looking at $3500 at the very most, some good shopping around will drop that price for sure. While you've got the head off the car, would maybe be worth having it decked and put the compression up a notch. You'll only be able to use 98+ octane though.

An exhaust can vary greatly, my CES exhaust was $2K, but it is awesome :blink:

I think you may be competative with stock GTts for sure, you've got about 100kg weight advantage over them.

Get one of those SS Turbo kits that put the turbo under the car at the rear; the cops will never know where to look :blink:

I'd save the money for mods and wait till you get off your Ps then upgrade to a GTT :D

hey santic, u reccon it would be hard buying a stock 25gt-t and changing that turbo rocker cover?? lol cops prob wouldnt know the diff, how do u go around registing a turbo as a non turbo shifty styleS? btw no way i can wait 3 years, how much do those turbo kits cost u were talking about

One from SS Turbo (I think that's the name of their company) is about $10k :no:

Don't think they do it for Nissans; I've only ever seen their work on a Holden Commdore (single blower out back) and a BMW M3 (twin blower out back). Both cars were seen at the Auto Trade Fair a few months back.

Does anyone have a link for one of these shift kits? How does it work, a more aggressive/high revving gear shift programing with transmission cooler?

I wouldn't want a high stall on my auto since that would make fuel consumption go down the drain hole!

the shift kits just make them change gears quicker. they don't give you more power.

as for mods, get a set of extractors, and a full exhaust. that should give you noticable gains, but your car will be noisey. probably louder than a turbo, depending on how many mufflers are in the system. but it will sound sweet. then just something like a safc2 to control the fuel.

shift kit - gear changes are crisper/ quicker and the auto can still change gears by itself

manual valve body - everytime you need to change gears, you need to move the stick (it will not change by itself)

kool thanks sloazr33 , wat do u guys recomend ? shift kit or manual valve body ?

Well imo, your auto for a reason (to be lazy) if you want to change gears yourself, buy a manual or convert yours.

definately a better way to go, but if you awnt to keep the auto, then its obvious, you just want a shift kit

its really a personal prefrence... if the skyline gearboxes are anything like the infinity which im pretty sure they are... you dont actually modify the valve body to manualise it rather an extra control bypasses the operations of the auto computer... about 60 bucks from MV automatics.. but with out a shift kitted valve body the shifts are still slow and sluggish.. Depending on how far u go with the shift kit u can make autos chirp gears during shifts just like manuals...

you've already got a tiptronic by the sounds of it, so just go a "stage 2 shift kit" which simply firms up gear changes.. basicalyl makes gear changes instantaneous so it chirps between gears on full throttle... do a search for more info i have posted the results of when i did this

for "hidden" mods, i would suggest...

exhaust: extractors and cat, but with stock cat-back. if its loud, it will be obvious that its modifed

intake: new air filter and cold air intake

head: adjustable cam gears

computer: some kind of adjustable management. try the SAFC2 for a cheap option

this will take base power from about 110rwkw in stock form to maybe 125rwkw. don't expect much more without big $$$ being spent. unfortunately you don't see the gains that you get with a turbo car...

best of luck,

Warren

for "hidden" mods, i would suggest...

exhaust: extractors and cat, but with stock cat-back. if its loud, it will be obvious that its modifed

intake: new air filter and cold air intake

head: adjustable cam gears

I dissagree (with the exaust only) there is alot of restriction in stock exausts, its not just pipe size, also flow etc (stock mufflers now being old on alot of cars, and they were cheap and basic to begin with) you can give a car a sports exaust and still have it quiet, and still get the gains, alot of the time, the sound is jsut because people want it, because it makes the car sound powerfull.

If you go to an exaust shop and you say you want the car to sound stock, but have a high flowing system on it, they'l do it happily, it just requires some mufflers a bit bigger.

Say a large resonator and a large high flow muffler with no tip (i.e. ending in normal piping) it will just look like you have had your exaust replaced, due to age or some other problem etc (and after a few months you wont even notice its new) and it will be quiet as, infact you could have a happy medium, like a tiny bit of a note, very quiet, nothing to turn heads, but just a nice sound.

And as for Stock looking mods, pretty much ANYTHING internal, Like Raising compression (if your sticking with N/A) by shaving the head/block or changing pistions, porting and polishing, lightweight gear, a mild cam...

etc, as long as you keep the engine tidy, but stock looking (like no chrome shit etc) if the boys in blue ever ask you to pop the hood, and they see a stock looking engine staring back at them, they wont hasstle you.

Things like keeping an airbox (maybe a bigger better one off another car) if you change the intake piping, paint it black, not chrome, you can still run a K&N filter etc...

go the sleeper

mate i disagree completely..

not on what you are saying, because you are right and i know that its not goign to flow great

but for this particular guy who wants it to look stock not just sound stock. an aftermarket exhaust will look aftermarket. all you have to do is look under the car and hey presto there's teh exhaust! cops aren't bright and don't car that its quiet if it looks aftermarket

for that stealth look but trying to get some more power, stick with the stock cat-back.

after all, its an NA car and won't respond to exhaust mods like a turbocharged car

horse for courses, and for this particular application its got to be the way

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
×
×
  • Create New...