Jump to content
SAU Community

Recommended Posts

As the title states..

r32 turbo ONLY. not sure whether it works. probably good for high flow or something along them lines.

I rather local pick up. Im in northern suburbs of melb. I can post interstate at buyers expense.

Not sure how much to sell for. So here's a price to start of at $100 || $60 or if you have a sensible offer, please let me know.

Please Note: I will not take any refunds or complaints if this item doesnt work. Description states clearly that i dont know whether it works. dont have a picture of it..but it is just the standard turbo of a r32 without wastegate.

contact: [email protected] or pm here.

cheers :angry:

Wastegate SOLD

Edited by SLYLNE
Link to comment
https://www.sau.com.au/forums/topic/136110-r32-turbo-without-wastegate/
Share on other sites

waste gate has just been sold...

now for sale is: r32 Turbo without the wastegate actuator.

same as above. $60ono

needs to go!!!

cheers

Edited by SLYLNE

are you located in brisbane? Well i could package it up, and depending on the weight, give you a price as to how much it will be via australia post. for both regular and express.

cheers

  • 2 weeks later...

turbo is still available. no wastegate though. $50 pickup. thats all im after. good for high flow i guess. buyer to pay any postage costs if pick up is not possible.and/ or if needs to be sent interstate.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...