Jump to content
SAU Community

Recommended Posts

[/b] Hi Guys,

My name's Kylee...This my first post on this fourm....Just got rid of my Vl which i had for over three years and decided I needed somethin a little newer and a bit quiker. So I bought a 94 R33 GTST and was just wondering if anyone can give me the correct specs of this make (Inc kw's). I was also curious to know whether or not they come standard with LSD, I have been told many different answers. Also, just wanted to know what the HICAS light means, I know what it stands for but it keeps comin up after i have driven the car for a while. I have been told its nothin to worry about and someone even mentioned theirs stays on the whole time cos they have a non standard computer? Anyway, my car is pretty much standard and I just had it dynoed and it has 158kw's so i was curious to know how many kw's they came out with :(

Link to comment
https://www.sau.com.au/forums/topic/136240-specs-of-a-r33-gtst/
Share on other sites

they came with 184kw (manual gearbox). that is at the flywheel, not the wheels. any power figure quoted by a manufacturer is at the flywheel.

and yes they come standard with lsd, but there is 2 types of lsd. most have the standard viscous lsd. some have the active lsd.

Edited by mad082
should these questions have come before you bought the car?

No, because i would have bought the car anyway. I was just curious... having answered these questions before I bought the car would have been irrelavant. Knowing how many kw's they come standard with and if they have LSD would not have changed my mind about buying one.. things can always be changed on it anyway!

hi kylee,

um good question i was also after specs on mine stocko. I have simlar model to Yours. .. i found this in the forum. One of the guys here made it, (great work btw), check it out here. http://nissanskyline.6te.net/

got loads of info on skylines stock.. um i think they were 147rwkw stock btw.

cheers

Oh ps. Hicas light comming on. isnt normal. mine comes on occasionally, (hicas diagnostic mode) where light comes on and steering tightens.. but i disconnect battery for about 15 mins, then reconnect, and its ok. I think probably sensor issue. But No mechanics or performance shops ive been too so far can figure it out. so good luck with that one. but first think is to disconnect battery, hicas fuse, Hicas computer, and check all sensors. and clean connections. if u can find someone who knows how to troubleshoot the system properly. let me know. :P

Edited by silverbulletR33
they came with 184kw (manual gearbox). that is at the flywheel, not the wheels. any power figure quoted by a manufacturer is at the flywheel.

and yes they come standard with lsd, but there is 2 types of lsd. most have the standard viscous lsd. some have the active lsd.

187kw for series 2

and less than 184 for auto R33's

Thanks guys for the input.

The hicas still came on when i had the standard steering wheel though.

I now realise after looking at the other sites that i make the extra power at the wheels from standard because i have the exhaust upgrade. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...