Jump to content
SAU Community

Recommended Posts

So if those cars with high inlet temps were to pull up next to another car with low inlet temps but same power on the dyno down at the local drag stip which will accelerate and run down the 1/4 quicker? My bet is the one with the low IT temps. But the power figures are the same. wtf. :(

Or think of it this way... Same car same car identical power curves at the same km/h, ones a turbo 6 ones a v8. The turbo 6 has had some pretty funky correction on its power curve due to its higher inlet temps. Which one will run down the 1/4 quicker? The N/A with its lower IT temps.

  • Replies 113
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

yep, common sense would say the 3rd one has the wrong IT :(

I'm thinking it was something else done wrong that gave such a massive power figure on mine (for a stock 33), so hopefully results similar to the norm can be acheived with the more accurate IT temp, so long as everything else is done correctly

tiz all too confusing to me

I'll just be happy to see a result that is 'normal' when compared to everyone elses with similar mods...ie paul, justin, and paradizzle all have similar mods (except para with the safc instead of the pfc) and are all around the 190-210rwkw mark :(

ramp rate (RR) being different will also alter the output figure.

higher ramp rate means the dyno pulls the car harder on the rollers, this can affect how the engine comes on boost, as more load means more boost. also the shootout mode can correct the figures accordingly

SHOOT4

SHOOT4F

SHOOT6

SHOOT6F

SHOOT8

SHOOTF

and so on, the F being forced induction turbo or supercharged.

so if your car was done in say SHOOT6 then you will get different results if you did your car in SHOOT6F and so on

At the last boostworx dyno day it was shown that the lesser shootout modes read slightly lower than the higher I.e Shoot4 vs Shoot81.

Looking through all the dyno sheets they are all within 5degree's of the AMB temp. I watched shaun place the IT sensor either in the cai snorkle or basically on the pod. HOWEVER.. Dyno runs were done with the bonnet up. So not really reflecting what would really occur on the street.

The way I see it is that if the IT is more than 10C higher than the AT, there is going be some good amount of correction involved. Infact that 'bogus' sheet shown before with similar AT/IT, thats the figures that would involve the least amount of SAE correction and thus a more 'real' result IMO. Anyone can get the temp sensor, throw it near the turbo manifold and get some bullshit results.

Before this thread gets hijacked ive got an update for those interested.

Took my car back to RE customs today to check it out again. We discovered the following. The timing on the car had been set to full advanced. The confusing part however was that the car was still running ok.

The problem is most likely to be either the timing belt was put on incorrectly and is out by a knob by my previous mechanic or the knock sensor is faulty or the wrong model.

Anyway, we reset the timing and moved it back a bit and we did another run on the dyno. For those of u non-believes the car still made 190rwkW and the AFR this time were areound 12.75. We did altogether 6 runs and the car did not ping or knock on any of the runs (altho i have been using octane booster lately)

Gonna take it back to Ray sometime next week to sort out the timing issue and if the timing belt has been installed incorrectly i am gonna lose it at my previous mechanic. At the end of the day however, i am basically driving around a 190rwkW basically stock skyline.... I guess it proves that the RB motor is one of the best responding motors to modification.

Your not running an adj. cam gear? This will throw the positioning of the cas sensor out.

Maybe the incorrectly set cam timing has helped power a tad. :wave:

Wouldn't it suck if you dropped it back to find its lost power everywhere and back to the norm.

I guess it proves that the RB motor is one of the best responding motors to modification.

How did it respond to modification if its stock?

Still dont see how 190rwkw is possible...its not really.

Did you check the ECU

Your not running an adj. cam gear? This will throw the positioning of the cas sensor out.

Maybe the incorrectly set cam timing has helped power a tad. :P

Wouldn't it suck if you dropped it back to find its lost power everywhere and back to the norm.

Nah its got stock cam gears... and yes it would suck :P ut i'd rather be safe than sorry

How did it respond to modification if its stock?

Still dont see how 190rwkw is possible...its not really.

Did you check the ECU

Its not completely stock, just lightly modded. Yea i checked the ECU it doesnt look like its remapped, i havent checked the inside of it yet. I reckon the timing is causing it to have this much power tho.

How did it respond to modification if its stock?

Still dont see how 190rwkw is possible...its not really.

Did you check the ECU

I dont see it possible either. See how it goes once all its little issues are sorted out (cam timing and afr).

If it still pulls high figures on stock boost then..................... get a run on a different dyno and if its still a high figure.............. well there's no explaination. :P

Its not completely stock, just lightly modded. Yea i checked the ECU it doesnt look like its remapped, i havent checked the inside of it yet. I reckon the timing is causing it to have this much power tho.

But you said you reset the timing and it still made 190...so it can't be the advanced timing...

You wouldn't be able to tell from the outside of the ECU if its been changed at all...

Maybe get a dyno run on another dyno just to see what that comes up with...or take it to the drags and see what mph you get...someone on here could work out rough power based on mph

hehe, i wasn't questioning the dyno or the operator...shit, im going there tomorrow so that wouldn't be a wise choice if i dont have faith in the workshop...

Just saying that in this case, its not a normal situation, so another dyno is just another option to get some ideas...chances are it will get a similar figure on the other dyno, then he can start crossing other shit off the list :P

Yea, atm i dont really care about the power figure, dont get me wrong, I'm like really happy, (less than $1000 spent and ive got 190rwkW) but im more worried bout the AFR. I reckon once that is fixed it'll go back down to 180... which is still pretty good for my mods, and not that unusual.

Dezz post up ur results when u get ur run 2moro. Good luck for getting 200rwkW, i will be very interested to see - my car has basically the same mods as u minus powerFC which I will hopefully be getting before Xmas.

IT & AT should be relatively the same for a turbo car

the DD "correction" is way off. The massive possible changed between cooler setups, boost levels/turbo efficiency etc can never be allowed for by some "software"

Remember the I/C will cool the charge, if its 55, its gonna be lower by the time it reaches the motor.

Closer to ambient is best

cheers

I'm still going to call botched figures.

Skylines simply don't make alomst 200rwkw standard.

As I said before, when my car was stock, it was in perfect condition, and by that I mean perfect. Motor was 169psi across all cylinders and 2% leakdown which is on par to brand new.

Made 140rwkw with 10psi and a full exhaust and FMIC.

210rwkw with powerfc added and 13psi boost, and toluene.

Dyno Dynamics Dyno.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for all the replies fellas. Gonna finish putting it back together and see how it handles the set up. If it starts pinging it’ll be parked.
    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
×
×
  • Create New...