Jump to content
SAU Community

Recommended Posts

I need to know everything possible to switch my car from Automatic to a Standard. Thanks in advance

trade in and buy a manual?

why go through the hassle? Your car would have to be pretty special to want to hang onto it that much i'd recon.

Link to comment
https://www.sau.com.au/forums/topic/136427-tranny-swap/#findComment-2538186
Share on other sites

trade in and buy a manual?

why go through the hassle? Your car would have to be pretty special to want to hang onto it that much i'd recon.

I live in New York (USA) and we do not have them readily available. They were only permitted in the US for a couple of years. And if I were to buy one from someone else it would cost me 70- to 80,000 dollars, If I can even find one. We drive on the left side and it is the only car in the US permitted to drive on the right side by US standards. What else would I need besides clutch pedal and manual tranny?

post-31966-1159455339.jpg

Link to comment
https://www.sau.com.au/forums/topic/136427-tranny-swap/#findComment-2538634
Share on other sites

Transmission from a RB25DET R33 in 5 speed of course

New Clutch ( I would do it since its all going to be apart)

Clutch and Brake Pedals

Driveshaft from the manual tranny

Clutch Master Cylender

Manual Tranny ECU

Those should be the main parts..

you should join up to www.GTRCanada.com were a little more local and have lots of exporters to help you find parts.

Hope that helps

Link to comment
https://www.sau.com.au/forums/topic/136427-tranny-swap/#findComment-2538699
Share on other sites

Transmission from a RB25DET R33 in 5 speed of course

New Clutch ( I would do it since its all going to be apart)

Clutch and Brake Pedals

Driveshaft from the manual tranny

Clutch Master Cylender

Manual Tranny ECU

Those should be the main parts..

you should join up to www.GTRCanada.com were a little more local and have lots of exporters to help you find parts.

Hope that helps

Thankyou much! I have linked up to "The Skyline Shop" in Canada and he has any part for them. Also I have linked up with RBmotoring in California with limited parts readily available. Do I really need to change the drive shaft despite the torque converter in an automatic tranny?

Link to comment
https://www.sau.com.au/forums/topic/136427-tranny-swap/#findComment-2538710
Share on other sites

You don't need a manual ECU! The ECU you have already will run your engine perfectly. The auto ECU is in the boot behind the seat but you don't even have to remove it since it just won't be doing any gear changes anyway.

edit - The main ECU is just in fron tof the passenger door under the kick panel, in other words there are two ECU's - one for manual and an extra one for auto.

Parts list

tail shaft or tail shaft yoke

gearstick surrounds and inner and outer boot

clutch and brake pedals

stick and gearbox

slave cylinder

master cyliner ( I think)

lines

clutch

gear stick knob

You could go for the full conversion kit second hand above for less than $3000 AUD before shipping.

There are plenty of suppliers in Australia that will supply you parts to the US. If you need help with this feel free to pm me.

While its not too hard to find most of the conversion parts it is becoming harder to find second hand gearboxes here - so for your reference its $3000 AUD for a brand new manual gearbox (just the gearbox) not including shipping.

Some extreme high quality clutches are made in Australia and you can get an ultralight 4.5kg chromolly flywheel and clutch together for a tad over $1000 AUD 12kg total weight for parcel including both.

Choice of clutch should be organic if your cars power is only lightly modified as you will have smooth clutch take up without shudder.

Edited by Edge
Link to comment
https://www.sau.com.au/forums/topic/136427-tranny-swap/#findComment-2538720
Share on other sites

You don't need a manual ECU! The ECU you have already will run your engine perfectly. The auto ECU is in the boot behind the seat but you don't even have to remove it since it just won't be doing any gear changes anyway.

edit - The main ECU is just in fron tof the passenger door under the kick panel, in other words there are two ECU's - one for manual and an extra one for auto.

Parts list

tail shaft or tail shaft yoke

gearstick surrounds and inner and outer boot

clutch and brake pedals

stick and gearbox

slave cylinder

master cyliner ( I think)

lines

clutch

gear stick knob

You could go for the full conversion kit second hand above for less than $3000 AUD before shipping.

There are plenty of suppliers in Australia that will supply you parts to the US. If you need help with this feel free to pm me.

While its not too hard to find most of the conversion parts it is becoming harder to find second hand gearboxes here - so for your reference its $3000 AUD for a brand new manual gearbox (just the gearbox) not including shipping.

Some extreme high quality clutches are made in Australia and you can get an ultralight 4.5kg chromolly flywheel and clutch together for a tad over $1000 AUD 12kg total weight for parcel including both.

Choice of clutch should be organic if your cars power is only lightly modified as you will have smooth clutch take up without shudder.

Thankyou very much :)

Link to comment
https://www.sau.com.au/forums/topic/136427-tranny-swap/#findComment-2538757
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...