Jump to content
SAU Community

Rb20 Gearbox In An R33 Gts-t

SoFreshSoClean
 Share

Recommended Posts

SoFreshSoClean Proficient

SoFreshSoClean

Posted
Posted

Gday, well Im doing to do a transmission swap in my turbo auto R33 because auto is teh sucks for throttle control.

Seeing as RB25 gearboxes are going for 1500 plus lately I was considering using an RB20 box. I was wondering if this was possible, ie a straight bolt in or would I have to stuff around to make it fit? Keep in mind I'm not building a power monster, ie im only aiming for 250-300rwhp MAX once I'm done with the car. I'm building it for response, not for massive straight line go.

Im just not sure if the RB20 box would cope with the increased torque. Also, I'm very sympathetic to my drivetrain, there will be no flatshifting or 7k launches etc.

Link to comment
https://www.sau.com.au/forums/topic/136560-rb20-gearbox-in-an-r33-gts-t/
Share on other sites
SoFreshSoClean Proficient

SoFreshSoClean

Posted
  • Author
Posted

Thanks Munna1 yeah I understand that its torque that kills em..

I've heard of people using them for VL turbos, with varying success. What would an average 250rwhp car be putting out in terms of torque? Keep in mind this is probably running stock turbo or a highflow item.

So it would bolt up, but require a custom driveshaft?

Anyone running big torque/power through a RB20 box?

brizzi Collaborator

brizzi

Posted
Posted

;) I would not bother dude! I just changed mine to a rb25det box, cos rb20det boxes dont handle much!

I know some people arnt made of money, whatever your cash flow is? Save your coin, and get a rb25 box!

Tailshaft slipyoke on a rb20det box is heaps smaller than an rb25 one :wave: So you will need tailshaft mods!

I want to change mine to auto cos i am sick to death of manual boxes! Me and them dont mix! ;)

People think manuals are quicker,but i think you have to be a perfect driver to make a difference shift times etc.. :)

FATGTS-R Experienced

FATGTS-R

Posted
Posted

In theory it shouldn't cope as Nissan themselves saw fit not to use it behind the RB25 but many people have used them with success.

Will all depend on how you drive it though and what condition the box is in when you get it.

R31NISMOID had a 20 box behind his RB25 (over 300rwhp) and it lasted a long time.

Also plenty Of R31 guys turbo the NA engine (3 litres = more torque than 25) and keep the standard box which is near on identical to a 20 and make them last, although some smash them every 6 months which again comes down to driving style, clutch choice and tyre choice.

If your car is still running with the auto I would just save a little longer and get the Rb25 item.

The 20 box is cheaper, yes, but you will need custom tail shaft, custom/modified gearbox mount and sort out the speed sender. Obviously with 33 box it will all be factory parts you can source s/hand.

R32 Driver Mentor

R32 Driver

Posted
Posted (edited)

play R 32 (i think thats his user name on the forums) is running in his R32 GTST with a RB26 conversion with a rb20 gearbox at over 300rwhp

since its an auto your going to need a custom tailshaft, centre console, clutch master/slave cylinders n shit done, if your not a bastard on your gearbox then a rb20 box would hold up fine

btw what is the price difference between a rb20 and rb25 box coz 1500 sounds cheap as last year when i enquired i was gettin quotes of 2-3k

1 more thing, C-red does a drive in drive out deal on this for $3800 using a 25 box, takes approx 4 days i THINK (quotes from last year so might be a outta date)

Edited by R32 Driver
dangerous_daveo Grand Master

dangerous_daveo

Posted
Posted

Two things to look at here. The condition of the box, you would expect an RB25 box to be in better condition as in most cases they are newer, and they are stronger. That and where your rb20 box is coming from, they might have done the same thing you are thinking of...

The other is resale (might not be thinking of it now but you should), I can tell you now if you car was identical to another price, colour extras etc, but yours had the rb20 box and the other was rb25... I wouldnt be buying your car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Did you panel beat the dents or have you tried to repair this only using filler?  Is your sanding block soft/flexible and is following the shape of the panel rather then just knocking down the high points? 
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      I haven't knocked them down yet. I think I made the repair more complex than it should have been. I had rock chips combined with waviness and dents and I tackled it all in one because it was near each other and just end up wasting a bunch of bog lol. I'll knock down those areas and see how I go. And yep what you are saying at the end is correct. I think I might be sanding the top of a steep hill then my sanding block falls into the dent and gets rid of the guidecoat if that makes sense. Though shouldnt unless I'm covering too big of an area with not a long enough block. I'll try something new and provide some updates. Getting there though! Thanks as always.  
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Yeah makes sense, hard to comment on your situation without seeing what your doing. I was talking generally before, I would not be looking to randomly create low spots with a hammer to then have to fill them.  It's hard without seeing what your doing, it sounds like you are using the guide coat to identify low spots, as you're saying the panel is still wavy. I don't see how you're not ending up with patches of guide coat remaining in a wavy panel? Once the high spots are knocked down to the correct level, surely to have a wavy panel you need low spots. And those low spots would have guide coat still in them?
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      So I'll put filler past the repair area a bit to make sure I don't miss anything. Then I'll block it until it's almost level, put the guidecoat, then keep blocking until it's gone. Then it's still wavy.  In regards to hitting the panel, I saw this video might give more context - Skip to 0:47 he knocks it down. But yeah I'm sanding until the guidecoat is gone then checking because otherwise my filler is still well above the bodyline. Unless what you're saying is I should put guidecoat around it early, surrounding the filler then stip once it's gone?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I refreshed the OEM injectors with the kit and connected it up. It now ideals okay even with the IACV removed. Driving still has the same cutoff issue like the 550cc injectors so the issue is somewhere else. I bought FPG's Fuel Pump Hanger. I will be installing it next, but it is not as straightforward as I thought it was with my limited wiring knowledge and no instruction on the specific model I purchased (FPG-089). I also got the incorrect billet clamp as I could not find info on the OEM sizing.
×
×
  • Create New...