Jump to content
SAU Community

Recommended Posts

I was wondering why my exhaust would be glowing?

Alright now to start with the problem I have when i'm driving it.

I will be sitting on about 100 and it will be sitting on about 3000rpm in 5th gear and when I try to speed up a little or even alot the car will start to boost up, but between 0 and .5 bar it is a real pain in the butt to gain or maintain boost. It will have like a flutter effect, the boost needle in my apexi boost guage will go up and down rapidly and the car will jerk back and forward while this is happening. Then all of a sudden it might just reach .5 bar and boost properly.

Does anyone know why it might be doing this?

Someone said to me that it might be the igniter, and if it is where do I get one and how much?

It has got so bad I don't even wanna drive my car.

Link to comment
https://www.sau.com.au/forums/topic/136570-gtr-exhast-glowing/
Share on other sites

I was wondering why my exhaust would be glowing?

Alright now to start with the problem I have when i'm driving it.

I will be sitting on about 100 and it will be sitting on about 3000rpm in 5th gear and when I try to speed up a little or even alot the car will start to boost up, but between 0 and .5 bar it is a real pain in the butt to gain or maintain boost. It will have like a flutter effect, the boost needle in my apexi boost guage will go up and down rapidly and the car will jerk back and forward while this is happening. Then all of a sudden it might just reach .5 bar and boost properly.

Does anyone know why it might be doing this?

Someone said to me that it might be the igniter, and if it is where do I get one and how much?

It has got so bad I don't even wanna drive my car.

How about some information for us to work with?

1. Lets start with what mods?

2. Then how about how long has it been doing it?

3. And what was the last thing you modified before it started doing it?

4. How long ago did you chasnge the sprk plugs?

5. What sort of plugs?

6. What gap?

Then we might be able to help.

:) cheers :D

1. has got forged pistons, eagle rods, balanced, garrett 2560 x2, triple plate, turbo back exhaust, running on 13psi, air filters, oil cooler, sar r2d2 bov

2. It has been doing it since i got the rebuild ( 2 weeks but han't driven it much) I took it to rajab racing and they dynoed it but didn't fit that problem they fixed another.

3. Before the engine blew nothin

4. Not since i bought it

5. NGK R

6. Don't know

Could it be coil packs ( i have been told that i need them to)

Thanks

1. has got forged pistons, eagle rods, balanced, garrett 2560 x2, triple plate, turbo back exhaust, running on 13psi, air filters, oil cooler, sar r2d2 bov

2. It has been doing it since i got the rebuild ( 2 weeks but han't driven it much) I took it to rajab racing and they dynoed it but didn't fit that problem they fixed another.

3. Before the engine blew nothin

4. Not since i bought it

5. NGK R

6. Don't know

Could it be coil packs ( i have been told that i need them to)

Thanks

There is no ECU on the list, so has it still got the standard one?

:) cheers :D

Have just got standard but it's been tuned gy mines b4 engine blew

There's your problem, it needs to be retuned.

It still might be worthwhile you checking the plug gap, around 0.8 mm is OK, but no larger.

If that helps, but doesn't cure it totally, then come down to 0.65 mm.

:) cheers :D

Get a PowerFC and take it to Racepace :)

And then all your problems will go.

Interesting you put eagle rods in there when only using 2560's

I wouldnt go buy coil packs, i bet yours are perfectly fine. You'd know if they werent working (or at least one wasnt)

The symptoms sound like compressor shuffle. This is quite common with the large low mounts terbs and seperate pod filters. Adding aftermarket BOVs can also worsen the problem as the standard GT-R BOV arrangement also acts as an equalising bridge on the intake side of the terbs.

I would suggest:

* refit the std BOV setup

* get the ECU retuned of fit a PFC as suggested (pay particular focus on the transition points around neutral boost)

* consider a bridged terb manifold

Cheers

Gav

Edited by Gav

what sort of boost controller you running too?

my old HKS EVC II would make the car 'surgey' (even after calibration)

a simple pnuematic bleed valve made it run much better

Along with the things Gary mentioned, this could also be and area to look at.

How much do these cost, where do i get them from and what is the difference between this and a normal manifold (do allow wastegates?)

Do you know where i can a cheap pfc with controler?

What spark plugs do you recommend?

Thanks

How much do these cost, where do i get them from and what is the difference between this and a normal manifold (do allow wastegates?)

Do you know where i can a cheap pfc with controler?

What spark plugs do you recommend?

Thanks

Mine is an HKS unit that I bought second hand and then ceramic coated (done after this pic). New I think that they're around $1,500 (check Nengun etc for pricing).

I can't say how much this helped on it's own, as I changed ECU's at the same time (went to D-Jetro). Just out of interest, have someone monitor the AFM voltages when you get the shuffling. The shuffling can sometime be bads enough to cause air reversion in the AFMs.

I was wondering why my exhaust would be glowing?

Alright now to start with the problem I have when i'm driving it.

I will be sitting on about 100 and it will be sitting on about 3000rpm in 5th gear and when I try to speed up a little or even alot the car will start to boost up, but between 0 and .5 bar it is a real pain in the butt to gain or maintain boost. It will have like a flutter effect, the boost needle in my apexi boost guage will go up and down rapidly and the car will jerk back and forward while this is happening. Then all of a sudden it might just reach .5 bar and boost properly.

Does anyone know why it might be doing this?

Someone said to me that it might be the igniter, and if it is where do I get one and how much?

It has got so bad I don't even wanna drive my car.

If it the exhaust is glowing red hot, I'd almost bet money that the exhaust cam is a tooth out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...