Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Guest SHAYNE

Does the noise get worse when you turn your lights on? Or increase as you rev the engine? I'm assuming you're running them off an amp. It sounds like you have engine noise - usually coming from a bad earth either at the amp or deck.... let me know how it's run and I'll offer more ideas.

Link to comment
https://www.sau.com.au/forums/topic/13668-car-audio/page/3/#findComment-301382
Share on other sites

yes, the more i rev the higher the pitch goes this is noticed very easily when driving and changing gears. Yes, running them of an amp.

no, noise doesnt get worse when i turn the lights on, only when engine is started.

Link to comment
https://www.sau.com.au/forums/topic/13668-car-audio/page/3/#findComment-301389
Share on other sites

Originally posted by Nozila

Does any1 know how i can reduce the static noise coming from my tweeters? It only happens when i start on the iginition.

thanx

this was one of the problems you guys were unable to sort out for me shayne ... not that i am complaining though mate :)

i can say forsure though that there was no common earth on the deck & amps, also speaker wire's were ran very close to power wires (although unavoidable in some spots)

sorry .. rant over :(

Link to comment
https://www.sau.com.au/forums/topic/13668-car-audio/page/3/#findComment-302661
Share on other sites

Guest SHAYNE

problem with a suppressor is that its only a bandaid on the problem meaning it will only reduce the problem not eliminate it.

make sure all the components are earthed at the same point . then try running the splits of the head unit( that will tell you if the problem is coming from the amp or head unit. do the tweeters have the engine noise when the car is running but the head unit and amp are off, that will tell you if the speaker placement or crossover placement is wrong.when the system is wired as you have it now and you disconnect the rca lead from the amp does the noise go away, if yes move the rca lead.if no plug the rca lead back in and take power away from the amp does the noise dissapear, if yes try moving the power lead( this doesny always fix the problem). try powering the amp from a battery external of the car ( just sitting on the floor) that will tell you if the car is at fault . lastly is the amp screwed to the floor being metal if so try placing it on a pieace of wood thereby its only earth source is the earth lead.

Link to comment
https://www.sau.com.au/forums/topic/13668-car-audio/page/3/#findComment-305231
Share on other sites

The stupid cables have been moved all around the car!! We thought they may be running too close to each other at first and we've tried about 10 different earthing points, but I still have a slight buzzing problem...not that I really hear it anymore, I'm that used to it!!

Link to comment
https://www.sau.com.au/forums/topic/13668-car-audio/page/3/#findComment-305816
Share on other sites

mine is still annoying me, sounds like a bov from within the car when im changing gears. a very loud one at that. my earth lead is placed on the same plae as the earth for the battery, could this be the problem as both are bolted to the same place.

Link to comment
https://www.sau.com.au/forums/topic/13668-car-audio/page/3/#findComment-308718
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...