Jump to content
SAU Community

Recommended Posts

in a healthy engine hardly any oil should go into the intake

if its a stock unmodoified car then don't worry about it

if its a modded car with FMIC runnign 14psi then might be worth it just to keep an eye on blowby..

money can be better spent elsewhere for your situation

Link to comment
https://www.sau.com.au/forums/topic/136876-oil-catch-can/#findComment-2544813
Share on other sites

exactly..

as with most things to do with cars, most people don't know what they are doing or talking about

i'm the first to admit if i don't know what's going on but in this case i know that a catch can does pretty much SFA on a stock engine. hell even on mine which is mildly modified i have not had any oil ever in my catch can

Link to comment
https://www.sau.com.au/forums/topic/136876-oil-catch-can/#findComment-2547488
Share on other sites

Even on a stock engine it can be beneficial in some way to stop blowby from being injested...a stock engine thats tired can still have blowby...oil mist into the engine makes it more prone to detonation and we all know that thats not good...so yes...it does pay to be safe...that said...they are not absolutely necessary...

Edited by limpus
Link to comment
https://www.sau.com.au/forums/topic/136876-oil-catch-can/#findComment-2548482
Share on other sites

exactly..

as with most things to do with cars, most people don't know what they are doing or talking about

i'm the first to admit if i don't know what's going on but in this case i know that a catch can does pretty much SFA on a stock engine. hell even on mine which is mildly modified i have not had any oil ever in my catch can

So you've got one??? But your telling ppl to "do as I say not as I do!!!"....................lol

Link to comment
https://www.sau.com.au/forums/topic/136876-oil-catch-can/#findComment-2548498
Share on other sites

Even on a stock engine it can be beneficial in some way to stop blowby from being injested...a stock engine thats tired can still have blowby...oil mist into the engine makes it more prone to detonation and we all know that thats not good...so yes...it does pay to be safe...that said...they are not absolutely necessary...

Finally someone that knows what he's talking about. Also if you set it up right, ie use a baffle, it is quite beneficial.

Link to comment
https://www.sau.com.au/forums/topic/136876-oil-catch-can/#findComment-2548512
Share on other sites

So you've got one??? But your telling ppl to "do as I say not as I do!!!"....................lol

my engine is not stock and i'm running 14psi through a motor with 150,000kms on it

plus it has engine-bling factor which i also desired

if you re-read the first post, you will realise that this guy is under the impression that a catch can is a necessary modification for his car based on what his mate told him.. this is not the case which i have been trying to point out

of course if your motor is stuffed it doesn't matter what mods you have it will still be useful but not necessary - a rebuild will be necessary in that case

anyone disagree? havign a good discussion is great...

Link to comment
https://www.sau.com.au/forums/topic/136876-oil-catch-can/#findComment-2548940
Share on other sites

a catch can, does exactly as the name implies. it catches oil in the intake. if you have oil in the intake, something is wrong and you should focus your efforts and $$ on fixing that. using a catch can simply masks the problem and gives you the "oh its ok to have blowby, the catch can fixes that" type of attitude.

Link to comment
https://www.sau.com.au/forums/topic/136876-oil-catch-can/#findComment-2550615
Share on other sites

Theres so much bad advice on forums like these (not saying this is a bad forum for that) but most people offer advice on products they know nothing about or have heard whats been going on around the rumour mill.

To pass emissions most of the blowby is recirculated into the intake. Its that simple. This is not good for combustion efficiency nor and can lead to preignition.

However a catch can, which allows the the oil air vapour to separate, stores the oil and vents the air to atmosphere. On a wet sump system this is often routed from the top of the cam cover, while on a dry sump system it also comes from the scavenge lines / deaerator.

They arent neccessary no. But an engine with high blowby may bog down, ping and get poor economy. So in that case they would be advisable.

Hope this helps ya.

Link to comment
https://www.sau.com.au/forums/topic/136876-oil-catch-can/#findComment-2553513
Share on other sites

Theres so much bad advice on forums like these (not saying this is a bad forum for that) but most people offer advice on products they know nothing about or have heard whats been going on around the rumour mill.

To pass emissions most of the blowby is recirculated into the intake. Its that simple. This is not good for combustion efficiency nor and can lead to preignition.

However a catch can, which allows the the oil air vapour to separate, stores the oil and vents the air to atmosphere. On a wet sump system this is often routed from the top of the cam cover, while on a dry sump system it also comes from the scavenge lines / deaerator.

They arent neccessary no. But an engine with high blowby may bog down, ping and get poor economy. So in that case they would be advisable.

Hope this helps ya.

This is what I have found out and been told and did have one for awhile and found it to be good and I was happy with it and I did not have any trouble with the police about it either.

Link to comment
https://www.sau.com.au/forums/topic/136876-oil-catch-can/#findComment-2553527
Share on other sites

Just a quick question,

What do you guys use to baffle your catch cans??

Steel wool or something similar??

And I didn't think it was illegal if it's connected up properly, if you have one with the airfiler attatched instead of going to the intake it would be illegal???

Cheers

Josh

Link to comment
https://www.sau.com.au/forums/topic/136876-oil-catch-can/#findComment-2553590
Share on other sites

Just a quick question,

What do you guys use to baffle your catch cans??

Steel wool or something similar??

And I didn't think it was illegal if it's connected up properly, if you have one with the airfiler attatched instead of going to the intake it would be illegal???

Cheers

Josh

Depends really, steel wool could be used, or sheet metal baffles.

Link to comment
https://www.sau.com.au/forums/topic/136876-oil-catch-can/#findComment-2553712
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...