Jump to content
SAU Community

Recommended Posts

Hello,

I want to go to the track soon but im still on stockies. Does anyone have some cheap wheels that would go ok on the track??

They are for my R33

Edited by R3sp3ct
Link to comment
https://www.sau.com.au/forums/topic/137244-wtb-wheels-for-the-track/
Share on other sites

Hello,

I want to go to the track soon but im still on stockies. Does anyone have some cheap wheels that would go ok on the track??

They are for my R33

I HAVE SOME.. :happy:

17 x 9 front and 17 x 10 rear with tyres... will sell them to you for $350 plus deliv, im in tassie, these would be great for track, they are the perfect offset for teh r33 as they are on mine... no spacers needed... have a look

let me know

the pic of my car is availbel if you follow the link

http://www.skylinesaustralia.com/forums/in...howtopic=134504

Hi hi,

Im still after wheels as the other ones fell through.

Prefere anything around 255, i want width!

yeah sorry about that, im getting them repaired though, but like you said "you could find something for that price and not need to worry about the price."

My rims were 17x9 and 17x10 and have yokohama rubber on them and i was selling them to him for $400 delivered....

if anyone has somethign similiar for a similiar price then help this bloke out...

Beef

Hi,

I have a very track worthy set of rims and tyres

I know these fit GTST's perfectly as a few of them are using these rims on our trackdays :D

Also im selling them with semi slicks so you're ready to get out there and have some fun

Link is below for you

Oh, maybe i didnt say it correctly, its rims and semi slicks for that price

The tyres are worth around $300 each, and have easily 85% left on them

So the rims are actually VERY cheap there

But if thats not your thing, no worries

I have some s15 stock wheel with bridgestone re540's on them. Two of the tyres are almost dead but would be fine if you run lots of camber (scrubbed on outside) but the other two are about 70% tread. After $450 which is what they cost me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
×
×
  • Create New...