Jump to content
SAU Community

Recommended Posts

Your thoughts,

While riding my bicycle home last night I had a brain wave, whether it being from lack of oxygen to it or something.

I am lead to believe (from information in this forum) that the series 1 turbo cannot be safely boosted above around 12 psi. This seems to be the weak point in the engine system to allow more boost as the usual way to increase boost would usually be a larger or hiflowed turbo. Would it be possible and economic to add another series 1 turbo (as it is relatively cheap 2nd hand) to the system so that both turbos do not have to work as hard to increase the boost to say 18-20 psi? Can the internals of the engine handle that?

Obviously, the following would need to be in place; larger intercooler, air intake, exhaust, upgraded fuel pump and injectors, and an engine management system.

What are your thoughts on this system, possible costs of the added turbo only, and any other constructive thoughts?

Mike

Link to comment
https://www.sau.com.au/forums/topic/13730-2nd-turbo-to-rb25det/
Share on other sites

I think what your thinking of is like the system that those race trucks use where 1 turbo feeds boost into the 2nd turbo's intake thereby increasing the final boost the engine recieves, really wouldn't work on stock R33 turbo's though, and not practical for a street car.

Another idea would be to setup a 2nd turbo after the dump pipe of the first so that both turbo's recieve all the gas flow of 6 cyclinders, hence no extra lag but double the airflow, similar to the Supra twin turbo.

Yeh,

Like I said, it was one of those thoughts that may not have any substance as there was a lacking of oxygen from riding my bike. Just a thought tho'

A 4dr GTR would be great as the cars I buy are required to have certain criterias to be filled (due to the wife's demands) and 4 doors is one of them. Luckily boot space wasn't, but now is. Looks like this cars here to stay.

You can get 4 door GTR's but they cost a bomb. If you're after more power, just sell your old turbo for around $500 and buy a new Garrett for around $2500. It'll work out to be around the same cost as adding another turbo (assuming that's even possible).

Also, for some reason insurance companies don't like twin turbos put onto cars that didn't come that way from the factory. My insurance company don't care that I've got an aftermarket turbo on, but they wanted to be sure that I didn't put a twin setup on. They don't actually care what the single turbo is though! Can't wait until I can afford a T88 ;) For some stupid reason they seem to think that going from single to twin turbo makes it insanely powerful. I didn't bother telling him that it's often the other way around.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...