Jump to content
SAU Community

Fs: 10lb Nitrous Wet Kit 'nos'

meth
 Share

Recommended Posts

meth Explorer

meth

Posted
Posted

I am selling my setup.

Genuine 'nos' brand.

Kit has:

10lb bottle (empty now) - mat blue

2 x foggers (for twin throttles)

50rwhp jets

all braided lines required for install

'nos' bottle pressure gauge

mounting brackets for bottle

solenoids and relay

Ready to install which is quite easy.

You don't need a re-map as this is a wet kit and only runs a 50rwhp jet. I used it on the dyno and my AF was virtually unchanged, actually slightly richer from memory and gave me ~35rwkw gain.

Selling because I am probably going with a dry kit after my rebuild is complete and run in.

This kit sells online delivered for $995 anywhere in australia and I am asking $800.

Kit has general wear and tear from being put on and off several times.

Located in Melbourne

pm or sms me 0402383944

Link to comment
https://www.sau.com.au/forums/topic/137457-fs-10lb-nitrous-wet-kit-nos/
Share on other sites
meth Explorer

meth

Posted
  • Author
Posted

I only have pics of it installed, haven't taken any of it out of the car. If you would like some just send me an email to h1p_h0p 'at' hotmail.com

Larger jets can be bought for about $5 and the kit has previously had 200hp jets in it. I think 300hp is the max for this kit.

The purge valve can be bought for about $100-120, but you can purge it with the car off before you run and it stays purged until you disconnect the bottle.

can you use larger jets?

has this kit got a seperate solinoid so you can purge?

  • 3 weeks later...
  • 1 year later...
WHITER33GTS-T Veteran

WHITER33GTS-T

Posted
Posted

Got mine from Vpw for just over $900 150hp kit with bottle blanket, purge kit, fogger nozzle, high flow valve, high flow filter, pressure guage and freight to Tassie

shanef Grand Master

shanef

Posted
Posted
Got mine from Vpw for just over $900 150hp kit with bottle blanket, purge kit, fogger nozzle, high flow valve, high flow filter, pressure guage and freight to Tassie

yeh but u suck ass...

P.S hook a brother up? :verymad:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • SteveL
      Prop Shaft rebuilding Melbourne.

      By SteveL · Posted

      The front prop shaft from my GTR had very notchy unis, which obviously needed replacement but unfortunately uses the (usually) non-replaceable (staked) type.     A new shaft is something like $2K plus shipping from Japan.   I wouldn't even bother asking the local Nissan spares dept.     Rang Hardy Spicer but no go, which surprised me a little.     There's a place over Dandenong way that would make me a 'performance' shaft but un-necessary in my situation.   They claimed to be getting the equipment in to replace staked unis but couldn't give me a timeframe.   Anyway, long story short, found a place to do the work just 5 mins from me: https://knoxdriveshafts.com.au $420 (cash) and about a week later I have my driveshaft back.   Price includes balancing. Owner is a one man band working out of a shed in his backyard but from what I could see he's very well setup with some expensive equipment.  
    • blind_elk
      Replacing Fuel Pressure Regulator

      By blind_elk · Posted

      Thanks. That's what I was after. One of the kits, the o-ring side is too big diameter. The other kit is a plate with a o-ring to seal and the hose connection offset.
    • Murray_Calavera
      Replacing Fuel Pressure Regulator

      By Murray_Calavera · Posted

      oops that seems much easier lol. 
    • Murray_Calavera
      Replacing Fuel Pressure Regulator

      By Murray_Calavera · Posted

      Are you using the factory rail?  Is there any reason you don't want to use one of the two you already have, they don't have to attach to the fuel rail directly.  If you 100% must have a FPR that directly bolts to the fuel rail, you could get a Radium setup. I use a radium fuel rail and the direct mount regulator, it is quite a sexy setup. 
    • GTSBoy
      Replacing Fuel Pressure Regulator

      By GTSBoy · Posted

      https://www.google.com/search?q=adjustable+fuel+pressure+regulator+nissan+fuel+rail+adapter&sca_esv=6710113de42d5150&source=hp&ei=GhPbaNHfNZeinesPyPqEiQc&iflsig=AOw8s4IAAAAAaNshKnLkjQGMWYT5EyclmXEJm8ZXSWDb&ved=0ahUKEwjR1JOCjf-PAxUXUWcHHUg9IXEQ4dUDCCE&uact=5&oq=adjustable+fuel+pressure+regulator+nissan+fuel+rail+adapter&gs_lp=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_EFhqEHecdnjv2SBwYyLjU1LjGgB7XnArIHBjAuNTUuMbgH4UXCBwgwLjUuNTEuMsgHiQI&sclient=gws-wiz
×
×
  • Create New...