Jump to content
SAU Community

Recommended Posts

Brand New Alarm system same function as Viper alarm

R/C Battery Recharge(option)

Super small size(thickness:13.5mm)

Four setps signal sensitivity antenna

Silm 2-Way remote control with LCD (20x24mm) monitor and LED backlight

Using most advance RF combo high stability, long distance, small size

continuously monitor car status

Remote transmitting up to 1000 meters (open field)

Paging transmitting up to 3000 meters (open field)

Five steps of battery level display

LCD clock display

key-press lock function

busy sound indication

vibration and audible warning

arming reminder

silent arming

Panic/car finder

power trunk release

automatic central locking control

shock/lgnition/footbrake/door alarm

alarm report memory

anti-hijacking

auto araming option

power/vacuum type central door lock option

automatic window lifting

remote engine start

remote engine and air-conditioner start

lithium button battery/lithium lon recharge button battery exchange

$290 $250 with delivered

post-32039-1160616399.jpg

Edited by allenlees15
Link to comment
https://www.sau.com.au/forums/topic/138343-fs-alarm/
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...