Jump to content
SAU Community

Recommended Posts

Well ladies and gentlemen,I found the answer to my own question. Just in case anyone else ever needs to know the Nissan part number is 55154-30POO. This is for the ball joint assembly and yes,the three letter suffix really is POO. ;) Must mean something different in Japanese. Fulcrum Suspension outlets can also get them for you. $80 each.

tierod ends on r32 are actually installed in the rear hubs and from memory the genuines are about the same price.

The steering 'arms' that fit directly to the rack are about $120 each genuine. If its the ones in the hub then you should consider replacing the other hub bushes.

Fulcrum actually developed their tools for replacing the R32 hub bushes on my car in Brisbane, the way all the links on the hubs stick out makes it very difficult to use a normal press to do the job.

tierod ends on r32 are actually installed in the rear hubs and from memory the genuines are about the same price.

The steering 'arms' that fit directly to the rack are about $120 each genuine. If its the ones in the hub then you should consider replacing the other hub bushes.

Fulcrum actually developed their tools for replacing the R32 hub bushes on my car in Brisbane, the way all the links on the hubs stick out makes it very difficult to use a normal press to do the job.

Yeah due to the space and angle its almost impossible... well actually I found it totally impossible to use a conventional press ended up just giving in and taking it to a place on Kamholtz Court who funnily enough are the Gold Coast Fulcrum Specialists and they had no problems completing the task. I never knew they had a specific tool just for this application... glad I lucked out and took it to a fulcrum place.

just replace it when something goes wrong.

ive heard from a lot of sources that R33 front tie rods fit and they are much thicker

Yep there is a slight size difference but its negligible and they are much beefier and cheap as chips as a lot of ppl buying front cuts for RB25's usually throw away these parts and are glad to make anything from them.

well actually I found it totally impossible to use a conventional press ended up just giving in and taking it to a place on Kamholtz Court who funnily enough are the Gold Coast Fulcrum Specialists and they had no problems completing the task.

yeah.. those guys did mine about 12 months ago as well.. They are pretty good with the old skylines.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...