Jump to content
SAU Community

Recommended Posts

hey.

just had an RBT done and the copper said if he wasnt doing the RBT he'd book me for my tint. i argued with him that it passed compliance etc because the tint is actually in the glass.

anyone (wa preferred) had any issues with this before or do the pit guys just let it ride as it's in the glass?

the back windows are very dark but the front has minor tinting in the glass, same with the rear window. i assume this is standard on stagea's or an option. i have a 96 S1 fully optioned model.

thanks

Shaun

Link to comment
https://www.sau.com.au/forums/topic/139133-stagea-tinted-glass/
Share on other sites

Yes, you can get dicked for it, but you can then just get it passed at a tint place, get them to write them a letter and bill the copper for you time.

I dont think people understand coppers can defect you for ANYTHING they THINK is illegal, regardless if it is or not.

If i got asked about the tint, id tell em to get f**ked and say that the fronts arnt done anyway, so its fine the way it is. Its like a van, which doesnt even have rear windows BUT can have suitable rear seats installed.

afaik in WA the only laws with regards to tint are to do with the front windows and the rears are not required to comply. if i am wrong please feel free to correct me can only comment from my own experiences

when we moved over from the ACT my dad had to take his car over the pits and it was tinted too dark, so the guy at the pits told him to peel off the front windows tint and the rears are no problems.

copper was probably just being looking for a reason to pick on you if it really had been defectable i am sure he would have had no problems with pulling you to the side then and there and slapping a yellow on your car

Yeah same in QLD, because it is not "direct viewable" then it doesnt matter how dark it is. but I had a copper ask me to put up the front two windows to check that they were not "tinted" the same and to his surprise, they werent....... but was told that as long as the front, rear and front side windows were at the legal level for tint darkness then I would be fine.

:wave:

Yeah same in QLD, because it is not "direct viewable" then it doesnt matter how dark it is. but I had a copper ask me to put up the front two windows to check that they were not "tinted" the same and to his surprise, they werent....... but was told that as long as the front, rear and front side windows were at the legal level for tint darkness then I would be fine.

So is your back window see thru??? Mine's black like the side ones.

my hatch door is black also

My hatch is dark also, I can see the tint edge around the wiper motor but looks totally factory standard, possibly applied before the window was installed? (looks that good) Has anyone obtained the documentation that states the windows are "factory" coloured? Might be handy to have it as a download for anyone that needs it... and save some time/pain.

Cheers

Luke

mines black all round... front sides and tailgate matched to the rear sides. have to wind down windows at night sometimes.

Havent been picked up for it yet, i generally have all the windows down while driving anyway. Bit of fresh air, plus the rear windows get a pretty cool angle going on, im sure youre all well aware, and have been asked many times if they are broken.

You can tell it is an aftermarket tint because the front glass is green, but you can only see it in bright daylight. Very cool at night, or when its parked with windows up. Not legal, though, no.

post-24895-1161146605.jpg

My rear window (boot) is black like the side rear ones. Only my windscreen and front driver and passenger window are not dark. I have no problems seeing out at night or anything though.

I've yet to be questioned about the "tint"....touch wood. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...